c语言函数大全(I开头)
There is no nutrition in the blog content. After reading it, you will not only suffer from malnutrition, but also impotence.
The blog content is all parallel goods. Those who are worried about being cheated should leave quickly.
函数名: imagesize
功 能: 返回保存位图像所需的字节数
用 法: unsigned far imagesize(int left, int top, int right, int bottom);
程序例:
#include
#include
#include
#include
#define ARROW_SIZE 10
void draw_arrow(int x, int y);
int main(void)
{
/* request autodetection */
int gdriver = DETECT, gmode, errorcode;
void *arrow;
int x, y, maxx;
unsigned int size;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
maxx = getmaxx();
x = 0;
y = getmaxy() / 2;
/* draw the image to be grabbed */
draw_arrow(x, y);
/* calculate the size of the image */
size = imagesize(x, y-ARROW_SIZE, x+(4*ARROW_SIZE), y+ARROW_SIZE);
/* allocate memory to hold the image */
arrow = malloc(size);
/* grab the image */
getimage(x, y-ARROW_SIZE, x+(4*ARROW_SIZE), y+ARROW_SIZE, arrow);
/* repeat until a key is pressed */
while (!kbhit())
{
/* erase old image */
putimage(x, y-ARROW_SIZE, arrow, XOR_PUT);
x += ARROW_SIZE;
if (x >= maxx)
x = 0;
/* plot new image */
putimage(x, y-ARROW_SIZE, arrow, XOR_PUT);
}
/* clean up */
free(arrow);
closegraph();
return 0;
}
void draw_arrow(int x, int y)
{
/* draw an arrow on the screen */
moveto(x, y);
linerel(4*ARROW_SIZE, 0);
linerel(-2*ARROW_SIZE, -1*ARROW_SIZE);
linerel(0, 2*ARROW_SIZE);
linerel(2*ARROW_SIZE, -1*ARROW_SIZE);
}
函数名: initgraph
功 能: 初始化图形系统
用 法: void far initgraph(int far *graphdriver, int far *graphmode,
char far *pathtodriver);
程序例:
#include
#include
#include
#include
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
/* initialize graphics mode */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* return with error code */
}
/* draw a line */
line(0, 0, getmaxx(), getmaxy());
/* clean up */
getch();
closegraph();
return 0;
}
函数名: inport
功 能: 从硬件端口中输入
用 法: int inp(int protid);
程序例:
#include
#include
int main(void)
{
int result;
int port = 0; /* serial port 0 */
result = inport(port);
printf("Word read from port %d = 0x%X\n", port, result);
return 0;
}
函数名: insline
功 能: 在文本窗口中插入一个空行
用 法: void insline(void);
程序例:
#include
int main(void)
{
clrscr();
cprintf("INSLINE inserts an empty line in the text window\r\n");
cprintf("at the cursor position using the current text\r\n");
cprintf("background color. All lines below the empty one\r\n");
cprintf("move down one line and the bottom line scrolls\r\n");
cprintf("off the bottom of the window.\r\n");
cprintf("\r\nPress any key to continue:");
gotoxy(1, 3);
getch();
insline();
getch();
return 0;
}
函数名: installuserdriver
功 能: 安装设备驱动程序到BGI设备驱动程序表中
用 法: int far installuserdriver(char far *name, int (*detect)(void));
程序例:
#include
#include
#include
#include
/* function prototypes */
int huge detectEGA(void);
void checkerrors(void);
int main(void)
{
int gdriver, gmode;
/* install a user written device driver */
gdriver = installuserdriver("EGA", detectEGA);
/* must force use of detection routine */
gdriver = DETECT;
/* check for any installation errors */
checkerrors();
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* check for any initialization errors */
checkerrors();
/* draw a line */
line(0, 0, getmaxx(), getmaxy());
/* clean up */
getch();
closegraph();
return 0;
}
/* detects EGA or VGA cards */
int huge detectEGA(void)
{
int driver, mode, sugmode = 0;
detectgraph(&driver, &mode);
if ((driver == EGA) || (driver == VGA))
/* return suggested video mode number */
return sugmode;
else
/* return an error code */
return grError;
}
/* check for and report any graphics errors */
void checkerrors(void)
{
int errorcode;
/* read result of last graphics operation */
errorcode = graphresult();
if (errorcode != grOk)
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1);
}
}
函数名: installuserfont
功 能: 安装未嵌入BGI系统的字体文件(CHR)
用 法: int far installuserfont(char far *name);
程序例:
#include
#include
#include
#include
/* function prototype */
void checkerrors(void);
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode;
int userfont;
int midx, midy;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* check for any initialization errors */
checkerrors();
/* install a user defined font file */
userfont = installuserfont("USER.CHR");
/* check for any installation errors */
checkerrors();
/* select the user font */
settextstyle(userfont, HORIZ_DIR, 4);
/* output some text */
outtextxy(midx, midy, "Testing!");
/* clean up */
getch();
closegraph();
return 0;
}
/* check for and report any graphics errors */
void checkerrors(void)
{
int errorcode;
/* read result of last graphics operation */
errorcode = graphresult();
if (errorcode != grOk)
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1);
}
}
函数名: int86
功 能: 通用8086软中断接口
用 法: int int86(int intr_num, union REGS *inregs, union REGS *outregs);
程序例:
#include
#include
#include
#define VIDEO 0x10
void movetoxy(int x, int y)
{
union REGS regs;
regs.h.ah = 2; /* set cursor postion */
regs.h.dh = y;
regs.h.dl = x;
regs.h.bh = 0; /* video page 0 */
int86(VIDEO, ?s, ?s);
}
int main(void)
{
clrscr();
movetoxy(35, 10);
printf("Hello\n");
return 0;
}
函数名: int86x
功 能: 通用8086软中断接口
用 法: int int86x(int intr_num, union REGS *insegs, union REGS *outregs,
struct SREGS *segregs);
程序例:
#include
#include
#include
int main(void)
{
char filename[80];
union REGS inregs, outregs;
struct SREGS segregs;
printf("Enter filename: ");
gets(filename);
inregs.h.ah = 0x43;
inregs.h.al = 0x21;
inregs.x.dx = FP_OFF(filename);
segregs.ds = FP_SEG(filename);
int86x(0x21, &inregs, &outregs, &segregs);
printf("File attribute: %X\n", outregs.x.cx);
return 0;
}
函数名: intdos
功 能: 通用DOS接口
用 法: int intdos(union REGS *inregs, union REGS *outregs);
程序例:
#include
#include
/* deletes file name; returns 0 on success, nonzero on failure */
int delete_file(char near *filename)
{
union REGS regs;
int ret;
regs.h.ah = 0x41; /* delete file */
regs.x.dx = (unsigned) filename;
ret = intdos(?s, ?s);
/* if carry flag is set, there was an error */
return(regs.x.cflag ? ret : 0);
}
int main(void)
{
int err;
err = delete_file("NOTEXIST.$$$");
if (!err)
printf("Able to delete NOTEXIST.$$$\n");
else
printf("Not Able to delete NOTEXIST.$$$\n");
return 0;
}
函数名: intdosx
功 能: 通用DOS中断接口
用 法: int intdosx(union REGS *inregs, union REGS *outregs,
struct SREGS *segregs);
程序例:
#include
#include
/* deletes file name; returns 0 on success, nonzero on failure */
int delete_file(char far *filename)
{
union REGS regs; struct SREGS sregs;
int ret;
regs.h.ah = 0x41; /* delete file */
regs.x.dx = FP_OFF(filename);
sregs.ds = FP_SEG(filename);
ret = intdosx(?s, ?s, &sregs);
/* if carry flag is set, there was an error */
return(regs.x.cflag ? ret : 0);
}
int main(void)
{
int err;
err = delete_file("NOTEXIST.$$$");
if (!err)
printf("Able to delete NOTEXIST.$$$\n");
else
printf("Not Able to delete NOTEXIST.$$$\n");
return 0;
}
函数名: intr
功 能: 改变软中断接口
用 法: void intr(int intr_num, struct REGPACK *preg);
程序例:
#include
#include
#include
#include
#define CF 1 /* Carry flag */
int main(void)
{
char directory[80];
struct REGPACK reg;
printf("Enter directory to change to: ");
gets(directory);
reg.r_ax = 0x3B << 8; /* shift 3Bh into AH */
reg.r_dx = FP_OFF(directory);
reg.r_ds = FP_SEG(directory);
intr(0x21, ?);
if (reg.r_flags & CF)
printf("Directory change failed\n");
getcwd(directory, 80);
printf("The current directory is: %s\n", directory);
return 0;
}
函数名: ioctl
功 能: 控制I/O设备
用 法: int ioctl(int handle, int cmd[,int *argdx, int argcx]);
程序例:
#include
#include
#include
int main(void)
{
int stat;
/* use func 8 to determine if the default drive is removable */
stat = ioctl(0, 8, 0, 0);
if (!stat)
printf("Drive %c is removable.\n", getdisk() + 'A');
else
printf("Drive %c is not removable.\n", getdisk() + 'A');
return 0;
}
函数名: isatty
功 能: 检查设备类型
用 法: int isatty(int handle);
程序例:
#include
#include
int main(void)
{
int handle;
handle = fileno(stdprn);
if (isatty(handle))
printf("Handle %d is a device type\n", handle);
else
printf("Handle %d isn't a device type\n", handle);
return 0;
}
函数名: itoa
功 能: 把一整数转换为字符串
用 法: char *itoa(int value, char *string, int radix);
程序例:
#include
#include
int main(void)
{
int number = 12345;
char string[25];
itoa(number, string, 10);
printf("integer = %d string = %s\n", number, string);
return 0;
}