[ root@localhost ~]
[ root@localhost opt]
[ root@localhost opt]
[ root@localhost tool]
[ root@localhost tool]
[ root@localhost nginx]
/opt/tool/nginx
[ root@localhost nginx]
[ root@localhost nginx]
/opt/tool/nginx
[ root@localhost nginx]
nginx-1.20.1.tar.gz openssl-1.0.1t.tar.gz pcre-8.37.tar.gz zlib-1.2.8.tar.gz
[ root@localhost nginx]
[ root@localhost nginx]
已加载插件：fastestmirror, langpacks | 2.9 kB 00:00:00
Determining fastest mirrors
* base: mirrors.nju.edu.cn
* centos-sclo-rh: mirrors.nju.edu.cn
* centos-sclo-sclo: mirrors.163.com
* extras: mirrors.nju.edu.cn
* updates: mirrors.nju.edu.cn
软件包 gcc-4.8.5-44.el7.x86_64 已安装并且是最新版本
无须任何处理
[ root@localhost nginx]
已加载插件：fastestmirror, langpacks
Loading mirror speeds from cached hostfile
* base: mirrors.nju.edu.cn
* centos-sclo-rh: mirrors.nju.edu.cn
* centos-sclo-sclo: mirrors.163.com
* extras: mirrors.nju.edu.cn
* updates: mirrors.nju.edu.cn
正在解决依赖关系
--> 正在检查事务
---> 软件包 gcc-c++.x86_64.0.4.8.5-44.el7 将被 安装
--> 正在处理依赖关系 libstdc++-devel = 4.8 .5-44.el7，它被软件包 gcc-c++-4.8.5-44.el7.x86_64 需要
--> 正在处理依赖关系 libstdc++ = 4.8 .5-44.el7，它被软件包 gcc-c++-4.8.5-44.el7.x86_64 需要
--> 正在检查事务
---> 软件包 libstdc++.x86_64.0.4.8.5-16.el7 将被 升级
---> 软件包 libstdc++.x86_64.0.4.8.5-44.el7 将被 更新
---> 软件包 libstdc++-devel.x86_64.0.4.8.5-44.el7 将被 安装
--> 解决依赖关系完成
依赖关系解决
== == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == ==
Package 架构 版本 源 大小
== == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == ==
正在安装:
gcc-c++ x86_64 4.8 .5-44.el7 base 7.2 M
为依赖而安装:
libstdc++-devel x86_64 4.8 .5-44.el7 base 1.5 M
为依赖而更新:
libstdc++ x86_64 4.8 .5-44.el7 base 306 k
事务概要
== == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == ==
安装 1 软件包 ( +1 依赖软件包)
升级 ( 1 依赖软件包)
总计：9.0 M
总下载量：8.7 M
Is this ok [ y/d/N] : y
Downloading packages:
gcc-c++-4.8.5-44.el7.x86_64.rp FAILED ] 0.0 B/s | 0 B --:--:-- ETA
http://mirrors.163.com/centos/7.9.2009/os/x86_64/Packages/gcc-c%2B%2B-4.8.5-44.el7.x86_64.rpm: [ Errno 14 ] HTTP Error 404 - Not Found-:--:-- ETA
正在尝试其它镜像。
To address this issue please refer to the below knowledge base article
https://access.redhat.com/articles/1320623
If above article doesn't help to resolve this issue please create a bug on https://bugs.centos.org/
( 1 /2) : libstdc++-devel-4.8.5-44.el7.x86_64.rpm | 1.5 MB 00:00:01
gcc-c++-4.8.5-44.el7.x86_64.rp FAILED
http://mirrors.bupt.edu.cn/centos/7.9.2009/os/x86_64/Packages/gcc-c%2B%2B-4.8.5-44.el7.x86_64.rpm: [ Errno 14 ] HTTP Error 404 - Not Found:04 ETA
正在尝试其它镜像。
( 2 /2) : gcc-c++-4.8.5-44.el7.x86_64.rpm | 7.2 MB 00:00:01
------------------------------------------------------------------------------------------------------------------------------------------------
总计 2.4 MB/s | 8.7 MB 00:00:03
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
正在更新 : libstdc++-4.8.5-44.el7.x86_64 1 /4
正在安装 : libstdc++-devel-4.8.5-44.el7.x86_64 2 /4
正在安装 : gcc-c++-4.8.5-44.el7.x86_64 3 /4
清理 : libstdc++-4.8.5-16.el7.x86_64 4 /4
验证中 : gcc-c++-4.8.5-44.el7.x86_64 1 /4
验证中 : libstdc++-devel-4.8.5-44.el7.x86_64 2 /4
验证中 : libstdc++-4.8.5-44.el7.x86_64 3 /4
验证中 : libstdc++-4.8.5-16.el7.x86_64 4 /4
已安装:
gcc-c++.x86_64 0 :4.8.5-44.el7
作为依赖被安装:
libstdc++-devel.x86_64 0 :4.8.5-44.el7
作为依赖被升级:
libstdc++.x86_64 0 :4.8.5-44.el7
完毕！
[ root@localhost nginx]
pcre-8.37/
pcre-8.37/pcre_scanner.h
pcre-8.37/LICENCE
pcre-8.37/makevp_c.txt
pcre-8.37/PrepareRelease
pcre-8.37/RunTest.bat
pcre-8.37/pcre16_study.c
pcre-8.37/pcre16_chartables.c
[ root@localhost nginx]
[ root@localhost pcre-8.37]
checking for a BSD-compatible install.. . /usr/bin/install -c
checking whether build environment is sane.. . yes
checking for a thread-safe mkdir -p.. . /usr/bin/mkdir -p
checking for gawk.. . gawk
checking whether make sets $( MAKE) .. . yes
checking whether make supports nested variables.. . yes
checking whether make supports nested variables.. . ( cached) yes
[ root@localhost pcre-8.37]
rm -f pcre_chartables.c
ln -s ./pcre_chartables.c.dist pcre_chartables.c
make all-am
make[ 1 ] : 进入目录“/opt/tool/nginx/pcre-8.37”
CC libpcre_la-pcre_byte_order.lo
CC libpcre_la-pcre_compile.lo
CC libpcre_la-pcre_config.lo
CC libpcre_la-pcre_dfa_exec.lo
[ root@localhost pcre-8.37]
make install-am
make[ 1 ] : 进入目录“/opt/tool/nginx/pcre-8.37”
make[ 2 ] : 进入目录“/opt/tool/nginx/pcre-8.37”
/usr/bin/mkdir -p '/usr/local/lib'
[ root@localhost nginx]
总用量 8064
-rw-r--r--. 1 root root 1061461 3 月 9 2023 nginx-1.20.1.tar.gz
-rw-r--r--. 1 root root 4556447 3 月 9 2023 openssl-1.0.1t.tar.gz
drwxr-xr-x. 9 1169 1169 12288 7 月 4 23 :33 pcre-8.37
-rw-r--r--. 1 root root 2041593 3 月 9 2023 pcre-8.37.tar.gz
-rw-r--r--. 1 root root 571091 3 月 9 2023 zlib-1.2.8.tar.gz
[ root@localhost nginx]
openssl-1.0.1t/ACKNOWLEDGMENTS
openssl-1.0.1t/apps/
openssl-1.0.1t/apps/app_rand.c
openssl-1.0.1t/apps/apps.c
openssl-1.0.1t/apps/apps.h
openssl-1.0.1t/apps/asn1pars.c
[ root@localhost nginx]
[ root@localhost openssl-1.0.1t]
Operating system: x86_64-whatever-linux2
Configuring for linux-x86_64
Configuring for linux-x86_64
no-ec_nistp_64_gcc_128 [ default] OPENSSL_NO_EC_NISTP_64_GCC_128 ( skip dir )
no-gmp [ default] OPENSSL_NO_GMP ( skip dir )
no-jpake [ experimental] OPENSSL_NO_JPAKE ( skip dir )
no-krb5 [ krb5-flavor not specified] OPENSSL_NO_KRB5
no-md2 [ default] OPENSSL_NO_MD2 ( skip dir )
no-rc5 [ default] OPENSSL_NO_RC5 ( skip dir )
[ root@localhost nginx]
[ root@localhost openssl-1.0.1t]
Operating system: x86_64-whatever-linux2
Configuring for linux-x86_64
Configuring for linux-x86_64
no-ec_nistp_64_gcc_128 [ default] OPENSSL_NO_EC_NISTP_64_GCC_128 ( skip dir )
no-gmp [ default] OPENSSL_NO_GMP ( skip dir )
no-jpake [ experimental] OPENSSL_NO_JPAKE ( skip dir )
no-krb5 [ krb5-flavor not specified] OPENSSL_NO_KRB5
no-md2 [ default] OPENSSL_NO_MD2 ( skip dir )
no-rc5 [ default] OPENSSL_NO_RC5 ( skip dir )
no-rfc3779 [ default] OPENSSL_NO_RFC3779 ( skip dir )
