USB免驱全协议ic读卡器：
小程序UI界面：
UI界面底代码：
namespace WindowsFormsApplication1
{
partial class Form1
{
/// <summary>
/// 必需的设计器变量。
/// </summary>
private System.ComponentModel.IContainer components = null;
/// <summary>
/// 清理所有正在使用的资源。
/// </summary>
/// <param name="disposing">如果应释放托管资源，为 true；否则为 false。</param>
protected override void Dispose(bool disposing)
{
if (disposing && (components != null))
{
components.Dispose();
}
base.Dispose(disposing);
}
#region Windows 窗体设计器生成的代码
/// <summary>
/// 设计器支持所需的方法 - 不要
/// 使用代码编辑器修改此方法的内容。
/// </summary>
private void InitializeComponent()
{
this.components = new System.ComponentModel.Container();
this.button1 = new System.Windows.Forms.Button();
this.button2 = new System.Windows.Forms.Button();
this.button3 = new System.Windows.Forms.Button();
this.button4 = new System.Windows.Forms.Button();
this.button5 = new System.Windows.Forms.Button();
this.button6 = new System.Windows.Forms.Button();
this.button7 = new System.Windows.Forms.Button();
this.button8 = new System.Windows.Forms.Button();
this.textBox1 = new System.Windows.Forms.TextBox();
this.button9 = new System.Windows.Forms.Button();
this.textBox3 = new System.Windows.Forms.TextBox();
this.button11 = new System.Windows.Forms.Button();
this.label1 = new System.Windows.Forms.Label();
this.textBox4 = new System.Windows.Forms.TextBox();
this.button12 = new System.Windows.Forms.Button();
this.timer1 = new System.Windows.Forms.Timer(this.components);
this.timer2 = new System.Windows.Forms.Timer(this.components);
this.button10 = new System.Windows.Forms.Button();
this.button13 = new System.Windows.Forms.Button();
this.button14 = new System.Windows.Forms.Button();
this.button15 = new System.Windows.Forms.Button();
this.button16 = new System.Windows.Forms.Button();
this.textBox2 = new System.Windows.Forms.TextBox();
this.textBox5 = new System.Windows.Forms.TextBox();
this.label2 = new System.Windows.Forms.Label();
this.textBox7 = new System.Windows.Forms.TextBox();
this.label3 = new System.Windows.Forms.Label();
this.label4 = new System.Windows.Forms.Label();
this.label5 = new System.Windows.Forms.Label();
this.label6 = new System.Windows.Forms.Label();
this.button17 = new System.Windows.Forms.Button();
this.textBox6 = new System.Windows.Forms.TextBox();
this.button18 = new System.Windows.Forms.Button();
this.button19 = new System.Windows.Forms.Button();
this.textBox8 = new System.Windows.Forms.TextBox();
this.button20 = new System.Windows.Forms.Button();
this.textBox9 = new System.Windows.Forms.TextBox();
this.timer3 = new System.Windows.Forms.Timer(this.components);
this.timer4 = new System.Windows.Forms.Timer(this.components);
this.SuspendLayout();
//
// button1
//
this.button1.Location = new System.Drawing.Point(40, 45);
this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(105, 30);
this.button1.TabIndex = 0;
this.button1.Text = "轻松读卡";
this.button1.UseVisualStyleBackColor = true;
this.button1.Click += new System.EventHandler(this.button1_Click);
//
// button2
//
this.button2.Location = new System.Drawing.Point(40, 81);
this.button2.Name = "button2";
this.button2.Size = new System.Drawing.Size(105, 30);
this.button2.TabIndex = 1;
this.button2.Text = "轻松写卡";
this.button2.UseVisualStyleBackColor = true;
this.button2.Click += new System.EventHandler(this.button2_Click);
//
// button3
//
this.button3.Location = new System.Drawing.Point(40, 350);
this.button3.Name = "button3";
this.button3.Size = new System.Drawing.Size(105, 30);
this.button3.TabIndex = 2;
this.button3.Text = "改单区密码";
this.button3.UseVisualStyleBackColor = true;
this.button3.Click += new System.EventHandler(this.button3_Click);
//
// button4
//
this.button4.ForeColor = System.Drawing.Color.Red;
this.button4.Location = new System.Drawing.Point(40, 7);
this.button4.Name = "button4";
this.button4.Size = new System.Drawing.Size(105, 30);
this.button4.TabIndex = 3;
this.button4.Text = "让设备发出声响";
this.button4.UseVisualStyleBackColor = true;
this.button4.Click += new System.EventHandler(this.button4_Click);
//
// button5
//
this.button5.ForeColor = System.Drawing.Color.Blue;
this.button5.Location = new System.Drawing.Point(40, 120);
this.button5.Name = "button5";
this.button5.Size = new System.Drawing.Size(105, 30);
this.button5.TabIndex = 4;
this.button5.Text = "写汉字至卡中";
this.button5.UseVisualStyleBackColor = true;
this.button5.Click += new System.EventHandler(this.button5_Click);
//
// button6
//
this.button6.ForeColor = System.Drawing.Color.Blue;
this.button6.Location = new System.Drawing.Point(151, 120);
this.button6.Name = "button6";
this.button6.Size = new System.Drawing.Size(105, 30);
this.button6.TabIndex = 5;
this.button6.Text = "从卡中读出汉字";
this.button6.UseVisualStyleBackColor = true;
this.button6.Click += new System.EventHandler(this.button6_Click);
//
// button7
//
this.button7.Location = new System.Drawing.Point(40, 189);
this.button7.Name = "button7";
this.button7.Size = new System.Drawing.Size(105, 30);
this.button7.TabIndex = 6;
this.button7.Text = "每十秒读一次";
this.button7.UseVisualStyleBackColor = true;
this.button7.Click += new System.EventHandler(this.button7_Click);
//
// button8
//
this.button8.Location = new System.Drawing.Point(40, 222);
this.button8.Name = "button8";
this.button8.Size = new System.Drawing.Size(429, 30);
this.button8.TabIndex = 7;
this.button8.Text = "读出设备全球唯一的设备编号，作为加密狗用";
this.button8.UseVisualStyleBackColor = true;
this.button8.Click += new System.EventHandler(this.button8_Click);
//
// textBox1
//
this.textBox1.ForeColor = System.Drawing.Color.Blue;
this.textBox1.Location = new System.Drawing.Point(40, 156);
this.textBox1.Name = "textBox1";
this.textBox1.RightToLeft = System.Windows.Forms.RightToLeft.Yes;
this.textBox1.Size = new System.Drawing.Size(438, 21);
this.textBox1.TabIndex = 8;
this.textBox1.Text = "王小明说：天下风云出我辈 一入江湖岁月催，Yes2018";
this.textBox1.TextAlign = System.Windows.Forms.HorizontalAlignment.Right;
//
// button9
//
this.button9.ForeColor = System.Drawing.Color.Blue;
this.button9.Location = new System.Drawing.Point(279, 120);
this.button9.Name = "button9";
this.button9.Size = new System.Drawing.Size(190, 30);
this.button9.TabIndex = 10;
this.button9.Text = "发送字符至带显示的读卡器";
this.button9.UseVisualStyleBackColor = true;
this.button9.Click += new System.EventHandler(this.button9_Click);
//
// textBox3
//
this.textBox3.ForeColor = System.Drawing.Color.Red;
this.textBox3.Location = new System.Drawing.Point(196, 313);
this.textBox3.Name = "textBox3";
this.textBox3.Size = new System.Drawing.Size(116, 21);
this.textBox3.TabIndex = 13;
//
// button11
//
this.button11.ForeColor = System.Drawing.Color.Red;
this.button11.Location = new System.Drawing.Point(40, 307);
this.button11.Name = "button11";
this.button11.Size = new System.Drawing.Size(105, 32);
this.button11.TabIndex = 11;
this.button11.Text = "只读卡号";
this.button11.UseVisualStyleBackColor = true;
this.button11.Click += new System.EventHandler(this.button11_Click);
//
// label1
//
this.label1.AutoSize = true;
this.label1.ForeColor = System.Drawing.Color.Red;
this.label1.Location = new System.Drawing.Point(149, 316);
this.label1.Name = "label1";
this.label1.Size = new System.Drawing.Size(41, 12);
this.label1.TabIndex = 14;
this.label1.Text = "卡号：";
//
// textBox4
//
this.textBox4.BackColor = System.Drawing.Color.White;
this.textBox4.Location = new System.Drawing.Point(151, 195);
this.textBox4.Name = "textBox4";
this.textBox4.Size = new System.Drawing.Size(87, 21);
this.textBox4.TabIndex = 18;
//
// button12
//
this.button12.ForeColor = System.Drawing.Color.Red;
this.button12.Location = new System.Drawing.Point(364, 302);
this.button12.Name = "button12";
this.button12.Size = new System.Drawing.Size(105, 32);
this.button12.TabIndex = 19;
this.button12.Text = "轮询读IC卡号";
this.button12.UseVisualStyleBackColor = true;
this.button12.Click += new System.EventHandler(this.button12_Click);
//
// timer1
//
this.timer1.Interval = 20;
this.timer1.Tick += new System.EventHandler(this.timer1_Tick);
//
// timer2
//
this.timer2.Interval = 6000;
this.timer2.Tick += new System.EventHandler(this.timer2_Tick);
//
// button10
//
this.button10.Location = new System.Drawing.Point(151, 350);
this.button10.Name = "button10";
this.button10.Size = new System.Drawing.Size(318, 30);
this.button10.TabIndex = 20;
this.button10.Text = "修改A、B密码及控制字";
this.button10.UseVisualStyleBackColor = true;
this.button10.Click += new System.EventHandler(this.button10_Click_1);
//
// button13
//
this.button13.ForeColor = System.Drawing.Color.Blue;
this.button13.Location = new System.Drawing.Point(40, 392);
this.button13.Name = "button13";
this.button13.Size = new System.Drawing.Size(164, 30);
this.button13.TabIndex = 21;
this.button13.Text = "写设备存储区1 4个字节";
this.button13.UseVisualStyleBackColor = true;
this.button13.Click += new System.EventHandler(this.button13_Click);
//
// button14
//
this.button14.ForeColor = System.Drawing.Color.Blue;
this.button14.Location = new System.Drawing.Point(364, 392);
this.button14.Name = "button14";
this.button14.Size = new System.Drawing.Size(105, 30);
this.button14.TabIndex = 22;
this.button14.Text = "读设备存储区1";
this.button14.UseVisualStyleBackColor = true;
this.button14.Click += new System.EventHandler(this.button14_Click);
//
// button15
//
this.button15.ForeColor = System.Drawing.Color.Blue;
this.button15.Location = new System.Drawing.Point(40, 428);
this.button15.Name = "button15";
this.button15.Size = new System.Drawing.Size(164, 30);
this.button15.TabIndex = 23;
this.button15.Text = "写设备存储区2 8个字节";
this.button15.UseVisualStyleBackColor = true;
this.button15.Click += new System.EventHandler(this.button15_Click);
//
// button16
//
this.button16.ForeColor = System.Drawing.Color.Blue;
this.button16.Location = new System.Drawing.Point(364, 428);
this.button16.Name = "button16";
this.button16.Size = new System.Drawing.Size(105, 30);
this.button16.TabIndex = 24;
this.button16.Text = "读设备存储区2";
this.button16.UseVisualStyleBackColor = true;
this.button16.Click += new System.EventHandler(this.button16_Click);
//
// textBox2
//
this.textBox2.ForeColor = System.Drawing.Color.Blue;
this.textBox2.Location = new System.Drawing.Point(222, 398);
this.textBox2.Name = "textBox2";
this.textBox2.Size = new System.Drawing.Size(57, 21);
this.textBox2.TabIndex = 25;
this.textBox2.Text = "01020304";
//
// textBox5
//
this.textBox5.ForeColor = System.Drawing.Color.Blue;
this.textBox5.Location = new System.Drawing.Point(222, 434);
this.textBox5.Name = "textBox5";
this.textBox5.Size = new System.Drawing.Size(108, 21);
this.textBox5.TabIndex = 26;
this.textBox5.Text = "0102030405060708";
//
// label2
//
this.label2.AutoSize = true;
this.label2.ForeColor = System.Drawing.Color.Blue;
this.label2.Location = new System.Drawing.Point(292, 401);
this.label2.Name = "label2";
this.label2.Size = new System.Drawing.Size(65, 12);
this.label2.TabIndex = 27;
this.label2.Text = "16进制数字";
//
// textBox7
//
this.textBox7.Font = new System.Drawing.Font("宋体", 10.5F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
this.textBox7.Location = new System.Drawing.Point(170, 59);
this.textBox7.Multiline = true;
this.textBox7.Name = "textBox7";
this.textBox7.Size = new System.Drawing.Size(230, 52);
this.textBox7.TabIndex = 29;
this.textBox7.Text = "000102030405060708090A0B0C0D0E0F000102030405060708090A0B0C0D0E0F00010203040506070" +
"8090A0B0C0D0E0F";
//
// label3
//
this.label3.AutoSize = true;
this.label3.Location = new System.Drawing.Point(168, 44);
this.label3.Name = "label3";
this.label3.Size = new System.Drawing.Size(65, 12);
this.label3.TabIndex = 30;
this.label3.Text = "16进制数字";
//
// label4
//
this.label4.AutoSize = true;
this.label4.Location = new System.Drawing.Point(406, 62);
this.label4.Name = "label4";
this.label4.Size = new System.Drawing.Size(47, 12);
this.label4.TabIndex = 31;
this.label4.Text = "第 0 块";
//
// label5
//
this.label5.AutoSize = true;
this.label5.Location = new System.Drawing.Point(406, 77);
this.label5.Name = "label5";
this.label5.Size = new System.Drawing.Size(47, 12);
this.label5.TabIndex = 32;
this.label5.Text = "第 1 块";
//
// label6
//
this.label6.AutoSize = true;
this.label6.Location = new System.Drawing.Point(406, 93);
this.label6.Name = "label6";
this.label6.Size = new System.Drawing.Size(47, 12);
this.label6.TabIndex = 33;
this.label6.Text = "第 2 块";
//
// button17
//
this.button17.ForeColor = System.Drawing.Color.FromArgb(((int)(((byte)(0)))), ((int)(((byte)(0)))), ((int)(((byte)(192)))));
this.button17.Location = new System.Drawing.Point(40, 267);
this.button17.Name = "button17";
this.button17.Size = new System.Drawing.Size(105, 30);
this.button17.TabIndex = 34;
this.button17.Text = "读指定块数据";
this.button17.UseVisualStyleBackColor = true;
this.button17.Click += new System.EventHandler(this.button17_Click);
//
// textBox6
//
this.textBox6.ForeColor = System.Drawing.Color.Red;
this.textBox6.Location = new System.Drawing.Point(151, 269);
this.textBox6.Name = "textBox6";
this.textBox6.Size = new System.Drawing.Size(209, 21);
this.textBox6.TabIndex = 35;
//
// button18
//
this.button18.ForeColor = System.Drawing.Color.FromArgb(((int)(((byte)(0)))), ((int)(((byte)(0)))), ((int)(((byte)(192)))));
this.button18.Location = new System.Drawing.Point(364, 263);
this.button18.Name = "button18";
this.button18.Size = new System.Drawing.Size(105, 30);
this.button18.TabIndex = 36;
this.button18.Text = "写指定块数据";
this.button18.UseVisualStyleBackColor = true;
this.button18.Click += new System.EventHandler(this.button18_Click);
//
// button19
//
this.button19.ForeColor = System.Drawing.Color.Red;
this.button19.Location = new System.Drawing.Point(40, 476);
this.button19.Name = "button19";
this.button19.Size = new System.Drawing.Size(164, 32);
this.button19.TabIndex = 37;
this.button19.Text = "开始侦听二代身份证UID";
this.button19.UseVisualStyleBackColor = true;
this.button19.Click += new System.EventHandler(this.button19_Click);
//
// textBox8
//
this.textBox8.ForeColor = System.Drawing.Color.Red;
this.textBox8.Location = new System.Drawing.Point(210, 476);
this.textBox8.Multiline = true;
this.textBox8.Name = "textBox8";
this.textBox8.Size = new System.Drawing.Size(259, 32);
this.textBox8.TabIndex = 38;
//
// button20
//
this.button20.ForeColor = System.Drawing.Color.Red;
this.button20.Location = new System.Drawing.Point(40, 524);
this.button20.Name = "button20";
this.button20.Size = new System.Drawing.Size(164, 32);
this.button20.TabIndex = 39;
this.button20.Text = "开始侦听HID ICLASS CSN";
this.button20.UseVisualStyleBackColor = true;
this.button20.Click += new System.EventHandler(this.button20_Click);
//
// textBox9
//
this.textBox9.ForeColor = System.Drawing.Color.Red;
this.textBox9.Location = new System.Drawing.Point(210, 525);
this.textBox9.Multiline = true;
this.textBox9.Name = "textBox9";
this.textBox9.Size = new System.Drawing.Size(259, 31);
this.textBox9.TabIndex = 40;
//
// timer3
//
this.timer3.Tick += new System.EventHandler(this.timer3_Tick);
//
// timer4
//
this.timer4.Tick += new System.EventHandler(this.timer4_Tick);
//
// Form1
//
this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 12F);
this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
this.ClientSize = new System.Drawing.Size(520, 577);
this.Controls.Add(this.textBox9);
this.Controls.Add(this.button20);
this.Controls.Add(this.textBox8);
this.Controls.Add(this.button19);
this.Controls.Add(this.button18);
this.Controls.Add(this.textBox6);
this.Controls.Add(this.button17);
this.Controls.Add(this.label6);
this.Controls.Add(this.label5);
this.Controls.Add(this.label4);
this.Controls.Add(this.label3);
this.Controls.Add(this.textBox7);
this.Controls.Add(this.label2);
this.Controls.Add(this.textBox5);
this.Controls.Add(this.textBox2);
this.Controls.Add(this.button16);
this.Controls.Add(this.button15);
this.Controls.Add(this.button14);
this.Controls.Add(this.button13);
this.Controls.Add(this.button10);
this.Controls.Add(this.button12);
this.Controls.Add(this.textBox4);
this.Controls.Add(this.label1);
this.Controls.Add(this.textBox3);
this.Controls.Add(this.button11);
this.Controls.Add(this.button9);
this.Controls.Add(this.textBox1);
this.Controls.Add(this.button8);
this.Controls.Add(this.button7);
this.Controls.Add(this.button6);
this.Controls.Add(this.button5);
this.Controls.Add(this.button4);
this.Controls.Add(this.button3);
this.Controls.Add(this.button2);
this.Controls.Add(this.button1);
this.MaximizeBox = false;
this.MinimizeBox = false;
this.Name = "Form1";
this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
this.Text = "IC卡读写动态库OUR_MIFARE.dll使用示例";
this.Load += new System.EventHandler(this.Form1_Load);
this.ResumeLayout(false);
this.PerformLayout();
}
#endregion
private System.Windows.Forms.Button button1;
private System.Windows.Forms.Button button2;
private System.Windows.Forms.Button button3;
private System.Windows.Forms.Button button4;
private System.Windows.Forms.Button button5;
private System.Windows.Forms.Button button6;
private System.Windows.Forms.Button button7;
private System.Windows.Forms.Button button8;
private System.Windows.Forms.TextBox textBox1;
private System.Windows.Forms.Button button9;
private System.Windows.Forms.TextBox textBox3;
private System.Windows.Forms.Button button11;
private System.Windows.Forms.Label label1;
private System.Windows.Forms.TextBox textBox4;
private System.Windows.Forms.Button button12;
private System.Windows.Forms.Timer timer1;
private System.Windows.Forms.Timer timer2;
private System.Windows.Forms.Button button10;
private System.Windows.Forms.Button button13;
private System.Windows.Forms.Button button14;
private System.Windows.Forms.Button button15;
private System.Windows.Forms.Button button16;
private System.Windows.Forms.TextBox textBox2;
private System.Windows.Forms.TextBox textBox5;
private System.Windows.Forms.Label label2;
private System.Windows.Forms.TextBox textBox7;
private System.Windows.Forms.Label label3;
private System.Windows.Forms.Label label4;
private System.Windows.Forms.Label label5;
private System.Windows.Forms.Label label6;
private System.Windows.Forms.Button button17;
private System.Windows.Forms.TextBox textBox6;
private System.Windows.Forms.Button button18;
private System.Windows.Forms.Button button19;
private System.Windows.Forms.TextBox textBox8;
private System.Windows.Forms.Button button20;
private System.Windows.Forms.TextBox textBox9;
private System.Windows.Forms.Timer timer3;
private System.Windows.Forms.Timer timer4;
}
}小程序代码：
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
//using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Runtime.InteropServices; //调用动态库一定要加入这个引用
using System.Text;//一定要加入这个
namespace WindowsFormsApplication1
{
public partial class Form1 : Form
{
public const byte BLOCK0_EN = 0x01;//操作第0块
public const byte BLOCK1_EN = 0x02;//操作第1块
public const byte BLOCK2_EN = 0x04;//操作第2块
public const byte NEEDSERIAL = 0x08;//仅对指定序列号的卡操作
public const byte EXTERNKEY = 0x10;
public const byte NEEDHALT = 0x20;//读卡或写卡后顺便休眠该卡，休眠后，卡必须拿离开感应区，再放回感应区，才能进行第二次操作。
//------------------------------------------------------------------------------------------------------------------------------------------------------
//外部函数声明：让设备发出声响
[DllImport("OUR_MIFARE.dll", EntryPoint = "pcdbeep", CallingConvention = CallingConvention.StdCall)]
static extern byte pcdbeep(UInt32 xms);//xms单位为毫秒
//------------------------------------------------------------------------------------------------------------------------------------------------------
//只读卡号
[DllImport("OUR_MIFARE.dll", EntryPoint = "piccrequest", CallingConvention = CallingConvention.StdCall)]
public static extern byte piccrequest(byte[] serial);//devicenumber用于返回编号
//------------------------------------------------------------------------------------------------------------------------------------------------------
//读取设备编号，可做为软件加密狗用,也可以根据此编号在公司网站上查询保修期限
[DllImport("OUR_MIFARE.dll", EntryPoint = "pcdgetdevicenumber", CallingConvention = CallingConvention.StdCall)]
static extern byte pcdgetdevicenumber(byte[] devicenumber);//devicenumber用于返回编号
//------------------------------------------------------------------------------------------------------------------------------------------------------
//轻松读卡
[DllImport("OUR_MIFARE.dll", EntryPoint = "piccreadex", CallingConvention = CallingConvention.StdCall)]
static extern byte piccreadex(byte ctrlword, byte[] serial, byte area, byte keyA1B0, byte[] picckey, byte[] piccdata0_2);
//参数：说明
//ctrlword：控制字
//serial：卡序列号数组，用于指定或返回卡序列号
//area：指定读卡区号
//keyA1B0：指定用A或B密码认证,一般是用A密码，只有特殊用途下才用B密码，在这不做详细解释。
//picckey：指定卡密码，6个字节，卡出厂时的初始密码为6个0xff
//piccdata0_2：用于返回卡该区第0块到第2块的数据，共48个字节.
//------------------------------------------------------------------------------------------------------------------------------------------------------
//轻松写卡
[DllImport("OUR_MIFARE.dll", EntryPoint = "piccwriteex", CallingConvention = CallingConvention.StdCall)]
static extern byte piccwriteex(byte ctrlword, byte[] serial, byte area, byte keyA1B0, byte[] picckey, byte[] piccdata0_2);
//参数：说明
//ctrlword：控制字
//serial：卡序列号数组，用于指定或返回卡序列号
//area：指定读卡区号
//keyA1B0：指定用A或B密码认证,一般是用A密码，只有特殊用途下才用B密码，在这不做详细解释。
//picckey：指定卡密码，6个字节，卡出厂时的初始密码为6个0xff
//piccdata0_2：用于返回卡该区第0块到第2块的数据，共48个字节.
//------------------------------------------------------------------------------------------------------------------------------------------------------
//密码认证方式1，用外部密码认证，必须指定外部密码。本函数必须在piccrequest或piccrequestex函数执行之后运行，并且要紧接着调用，中途不能调用其他函数。
[DllImport("OUR_MIFARE.dll", EntryPoint = "piccauthkey1", CallingConvention = CallingConvention.StdCall)]
static extern byte piccauthkey1(byte[] serial, byte area, byte keyA1B0, byte[] picckey);
//参数：说明
//serial：卡序列号数组，用于指定或返回卡序列号
//area：指定读卡区号
//keyA1B0：指定用A或B密码认证,一般是用A密码，只有特殊用途下才用B密码，在这不做详细解释。
//picckey：指定卡密码，6个字节，卡出厂时的初始密码为6个0xff
//------------------------------------------------------------------------------------------------------------------------------------------------------
//读出一块的数据，也就是16个字节。必须在执行piccrequest或 Piccrequestex函数，接着执行piccauthkey1或 piccauthkey2函数，然后执行piccread才能成功读出一块的数据。
[DllImport("OUR_MIFARE.dll", EntryPoint = "piccread", CallingConvention = CallingConvention.StdCall)]
static extern byte piccread(byte block, byte[] blockdata);
//参数：说明
//block：指定读卡块号
//blockdata：用于返回卡该块数据，共16个字节.
//------------------------------------------------------------------------------------------------------------------------------------------------------
//写一块的数据，也就是16个字节。必须在执行piccrequest或 Piccrequestex函数，接着执行piccauthkey1或 piccauthkey2函数，然后执行piccread才能成功读出一块的数据。
[DllImport("OUR_MIFARE.dll", EntryPoint = "piccwrite", CallingConvention = CallingConvention.StdCall)]
static extern byte piccwrite(byte block, byte[] blockdata);
//参数：说明
//block：指定写卡块号
//blockdata：写块数据缓冲，共16个字节.
//------------------------------------------------------------------------------------------------------------------------------------------------------
//修改卡单区的密码
[DllImport("OUR_MIFARE.dll", EntryPoint = "piccchangesinglekey", CallingConvention = CallingConvention.StdCall)]
static extern byte piccchangesinglekey(byte ctrlword, byte[] serial, byte area, byte keyA1B0, byte[] piccoldkey, byte[] piccnewkey);
//参数：说明
//ctrlword：控制字
//serial：卡序列号数组，用于指定或返回卡序列号
//area：指定读卡区号
//keyA1B0：指定用A或B密码认证,一般是用A密码，只有特殊用途下才用B密码，在这不做详细解释。
//piccoldkey：//旧密码
//piccnewkey：//新密码.
//------------------------------------------------------------------------------------------------------------------------------------------------------
//修改卡A/B密码及控制字
[DllImport("OUR_MIFARE.dll", EntryPoint = "piccchangesinglekeyex", CallingConvention = CallingConvention.StdCall)]
static extern byte piccchangesinglekeyex(byte ctrlword, byte[] serial, byte area, byte keyA1B0, byte[] piccoldkey, byte[] piccnewkey);
//参数：说明
//ctrlword：控制字
//serial：卡序列号数组，用于指定或返回卡序列号
//area：指定读卡区号
//keyA1B0：指定用A或B密码认证,一般是用A密码，只有特殊用途下才用B密码，在这不做详细解释。
//piccoldkey：//旧密码
//piccnewkey：//新密码.
//------------------------------------------------------------------------------------------------------------------------------------------------------
//发送显示内容到读卡器
[DllImport("OUR_MIFARE.dll", EntryPoint = "lcddispfull", CallingConvention = CallingConvention.StdCall)]
static extern byte lcddispfull(string lcdstr);
//参数：说明
//lcdstr：显示内容
//------------------------------------------------------------------------------------------------------------------------------------------------------
//写设备存储区1
[DllImport("OUR_MIFARE.dll", EntryPoint = "pcdsetcustomizedata1", CallingConvention = CallingConvention.StdCall)]
public static extern byte pcdsetcustomizedata1(byte[] readerdata);//devicenumber用于传递写数据
//------------------------------------------------------------------------------------------------------------------------------------------------------
//读设备存储区1
[DllImport("OUR_MIFARE.dll", EntryPoint = "pcdgetcustomizedata1", CallingConvention = CallingConvention.StdCall)]
public static extern byte pcdgetcustomizedata1(byte[] readerdata);//devicenumber用于传递写数据
//------------------------------------------------------------------------------------------------------------------------------------------------------
//写设备存储区2
[DllImport("OUR_MIFARE.dll", EntryPoint = "pcdsetcustomizedata2", CallingConvention = CallingConvention.StdCall)]
public static extern byte pcdsetcustomizedata2(byte[] readerdata);//devicenumber用于传递写数据
//------------------------------------------------------------------------------------------------------------------------------------------------------
//读设备存储区2
[DllImport("OUR_MIFARE.dll", EntryPoint = "pcdgetcustomizedata2", CallingConvention = CallingConvention.StdCall)]
public static extern byte pcdgetcustomizedata2(byte[] readerdata, byte[] devno);//devicenumber用于传递写数据
//------------------------------------------------------------------------------------------------------------------------------------------------------
//读二代身份证UID
[DllImport("OUR_MIFARE.dll", EntryPoint = "sfzrequest", CallingConvention = CallingConvention.StdCall)]
public static extern byte sfzrequest(byte[] serial);//devicenumber用于返回UID号
//------------------------------------------------------------------------------------------------------------------------------------------------------
//读HID ICLASS CSN
[DllImport("OUR_MIFARE.dll", EntryPoint = "iso15693iclassreadcsn", CallingConvention = CallingConvention.StdCall)]
public static extern byte iso15693iclassreadcsn(byte[] serial);//devicenumber用于返回CSN号
public Form1()
{
InitializeComponent();
}
private void button1_Click(object sender, EventArgs e)//轻松读卡
{
byte status;//存放返回值
byte myareano;//区号
byte authmode;//密码类型，用A密码或B密码
byte myctrlword;//控制字
byte[] mypicckey = new byte[6];//密码
byte[] mypiccserial = new byte[4];//卡序列号
byte[] mypiccdata = new byte[48]; //卡数据缓冲
//控制字指定,控制字的含义请查看本公司网站提供的动态库说明
myctrlword = BLOCK0_EN + BLOCK1_EN + BLOCK2_EN + EXTERNKEY;
//指定区号
myareano = 8;//指定为第8区
//批定密码模式
authmode = 1;//大于0表示用A密码认证，推荐用A密码认证
//指定密码
mypicckey[0] = 0xff;
mypicckey[1] = 0xff;
mypicckey[2] = 0xff;
mypicckey[3] = 0xff;
mypicckey[4] = 0xff;
mypicckey[5] = 0xff;
status = piccreadex(myctrlword, mypiccserial, myareano, authmode, mypicckey, mypiccdata);
//在下面设定断点，然后查看mypiccserial、mypiccdata，
//调用完 piccreadex函数可读出卡序列号到 mypiccserial，读出卡数据到mypiccdata，
//开发人员根据自己的需要处理mypiccserial、mypiccdata 中的数据了。
//处理返回函数
switch (status)
{
case 0:
pcdbeep(20);
string readinf = "";
for (int i = 0; i < 48;i++ )
{
readinf = readinf + mypiccdata[i].ToString("X2");
}
textBox7.Text = readinf;
MessageBox.Show("操作成功,数据已显示在右框栏中！","示例程序");
break;
case 8:
MessageBox.Show("未寻到卡，请将卡放在感应区！", "示例提示");
break;
case 9:
MessageBox.Show("读序列码错误！", "示例提示");
break;
case 10:
MessageBox.Show("选卡错误！", "示例提示");
break;
case 11:
MessageBox.Show("装载密码错误！", "示例提示");
break;
case 12:
MessageBox.Show("卡密码认证错误！", "示例提示");
break;
case 13:
MessageBox.Show("读卡错误！", "示例提示");
break;
case 14:
MessageBox.Show("写卡错误！", "示例提示");
break;
case 21:
MessageBox.Show("没有动态库！", "示例提示");
break;
case 22:
MessageBox.Show("动态库或驱动程序异常！", "示例提示");
break;
case 23:
MessageBox.Show("驱动程序错误或尚未安装！", "示例提示");
break;
case 24:
MessageBox.Show("操作超时，一般是动态库没有反映！", "示例提示");
break;
case 25:
MessageBox.Show("发送字数不够！", "示例提示");
break;
case 26:
MessageBox.Show("发送的CRC错！", "示例提示");
break;
case 27:
MessageBox.Show("接收的字数不够！", "示例提示");
break;
case 28:
MessageBox.Show("接收的CRC错！", "示例提示");
break;
default:
MessageBox.Show("返回码(对应的说明请看例子中的注释):" + status, "示例提示");
break;
}
//返回解释
/*
REQUEST 8//寻卡错误
READSERIAL 9//读序列吗错误
SELECTCARD 10//选卡错误
LOADKEY 11//装载密码错误
AUTHKEY 12//密码认证错误
READ 13//读卡错误
WRITE 14//写卡错误
NONEDLL 21//没有动态库
DRIVERORDLL 22//动态库或驱动程序异常
DRIVERNULL 23//驱动程序错误或尚未安装
TIMEOUT 24//操作超时，一般是动态库没有反映
TXSIZE 25//发送字数不够
TXCRC 26//发送的CRC错
RXSIZE 27//接收的字数不够
RXCRC 28//接收的CRC错
*/
}
private void button2_Click(object sender, EventArgs e)//轻松写卡
{
byte i;
byte status;//存放返回值
byte myareano;//区号
byte authmode;//密码类型，用A密码或B密码
byte myctrlword;//控制字
byte[] mypicckey = new byte[6];//密码
byte[] mypiccserial = new byte[4];//卡序列号
byte[] mypiccdata = new byte[48]; //卡数据缓冲
//控制字指定,控制字的含义请查看本公司网站提供的动态库说明
myctrlword = BLOCK0_EN + BLOCK1_EN + BLOCK2_EN + EXTERNKEY;
//指定区号
myareano = 8;//指定为第8区
//批定密码模式
authmode = 1;//大于0表示用A密码认证，推荐用A密码认证
//指定密码
mypicckey[0] = 0xff;
mypicckey[1] = 0xff;
mypicckey[2] = 0xff;
mypicckey[3] = 0xff;
mypicckey[4] = 0xff;
mypicckey[5] = 0xff;
//指定卡数据
string writinf = textBox7.Text.Trim() + "0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000";
for (i = 0; i < 48; i++)
{
mypiccdata[i] = Convert.ToByte(Convert.ToInt32(writinf.Substring(i * 2, 2), 16));
}
status = piccwriteex(myctrlword, mypiccserial, myareano, authmode, mypicckey, mypiccdata);
//在下面设定断点，然后查看mypiccserial、mypiccdata，
//调用完 piccreadex函数可读出卡序列号到 mypiccserial，读出卡数据到mypiccdata，
//开发人员根据自己的需要处理mypiccserial、mypiccdata 中的数据了。
//处理返回函数
switch (status)
{
case 0:
pcdbeep(50);
MessageBox.Show("操作成功,右栏数据已写入卡中！", "示例提示");
break;
case 8:
MessageBox.Show("未寻到卡，请将卡放在感应区！", "示例提示");
break;
case 9:
MessageBox.Show("读序列码错误！", "示例提示");
break;
case 10:
MessageBox.Show("选卡错误！", "示例提示");
break;
case 11:
MessageBox.Show("装载密码错误！", "示例提示");
break;
case 12:
MessageBox.Show("卡密码认证错误！", "示例提示");
break;
case 13:
MessageBox.Show("读卡错误！", "示例提示");
break;
case 14:
MessageBox.Show("写卡错误！", "示例提示");
break;
case 21:
MessageBox.Show("没有动态库！", "示例提示");
break;
case 22:
MessageBox.Show("动态库或驱动程序异常！", "示例提示");
break;
case 23:
MessageBox.Show("驱动程序错误或尚未安装！", "示例提示");
break;
case 24:
MessageBox.Show("操作超时，一般是动态库没有反映！", "示例提示");
break;
case 25:
MessageBox.Show("发送字数不够！", "示例提示");
break;
case 26:
MessageBox.Show("发送的CRC错！", "示例提示");
break;
case 27:
MessageBox.Show("接收的字数不够！", "示例提示");
break;
case 28:
MessageBox.Show("接收的CRC错！", "示例提示");
break;
default:
MessageBox.Show("返回码(对应的说明请看例子中的注释):" + status, "示例提示");
break;
}
//返回解释
/*
REQUEST 8//寻卡错误
READSERIAL 9//读序列吗错误
SELECTCARD 10//选卡错误
LOADKEY 11//装载密码错误
AUTHKEY 12//密码认证错误
READ 13//读卡错误
WRITE 14//写卡错误
NONEDLL 21//没有动态库
DRIVERORDLL 22//动态库或驱动程序异常
DRIVERNULL 23//驱动程序错误或尚未安装
TIMEOUT 24//操作超时，一般是动态库没有反映
TXSIZE 25//发送字数不够
TXCRC 26//发送的CRC错
RXSIZE 27//接收的字数不够
RXCRC 28//接收的CRC错
*/
}
private void button4_Click(object sender, EventArgs e)
{
pcdbeep(50);
}
private void button3_Click(object sender, EventArgs e)
{
byte status;//存放返回值
byte myareano;//区号
byte authmode;//密码类型，用A密码或B密码
byte myctrlword;//控制字
byte[] piccoldkey = new byte[6];//旧密码
byte[] mypiccserial = new byte[4];//卡序列号
byte[] piccnewkey = new byte[6]; //新密码.
//控制字指定,控制字的含义请查看本公司网站提供的动态库说明
myctrlword = 0;
//指定区号
myareano = 8;//指定为第8区
//批定密码模式
authmode = 1;//大于0表示用A密码认证，推荐用A密码认证
//指定旧密码
piccoldkey[0] = 0xff;
piccoldkey[1] = 0xff;
piccoldkey[2] = 0xff;
piccoldkey[3] = 0xff;
piccoldkey[4] = 0xff;
piccoldkey[5] = 0xff;
//指定新密码,注意：指定新密码时一定要记住，否则有可能找不回密码，导致该卡报废。
piccnewkey[0] = 0xff;
piccnewkey[1] = 0xff;
piccnewkey[2] = 0xff;
piccnewkey[3] = 0xff;
piccnewkey[4] = 0xff;
piccnewkey[5] = 0xff;
status = piccchangesinglekey(myctrlword, mypiccserial, myareano, authmode, piccoldkey, piccnewkey);
//在下面设定断点，然后查看mypiccserial、mypiccdata，
//调用完 piccreadex函数可读出卡序列号到 mypiccserial，读出卡数据到mypiccdata，
//开发人员根据自己的需要处理mypiccserial、mypiccdata 中的数据了。
//处理返回函数
switch (status)
{
case 0:
MessageBox.Show("操作成功,密码已被修改!");
break;
case 8:
MessageBox.Show("未寻到卡，请将卡放在感应区！", "示例提示");
break;
case 9:
MessageBox.Show("读序列码错误！", "示例提示");
break;
case 10:
MessageBox.Show("选卡错误！", "示例提示");
break;
case 11:
MessageBox.Show("装载密码错误！", "示例提示");
break;
case 12:
MessageBox.Show("卡密码认证错误！", "示例提示");
break;
case 13:
MessageBox.Show("读卡错误！", "示例提示");
break;
case 14:
MessageBox.Show("写卡错误！", "示例提示");
break;
case 21:
MessageBox.Show("没有动态库！", "示例提示");
break;
case 22:
MessageBox.Show("动态库或驱动程序异常！", "示例提示");
break;
case 23:
MessageBox.Show("驱动程序错误或尚未安装！", "示例提示");
break;
case 24:
MessageBox.Show("操作超时，一般是动态库没有反映！", "示例提示");
break;
case 25:
MessageBox.Show("发送字数不够！", "示例提示");
break;
case 26:
MessageBox.Show("发送的CRC错！", "示例提示");
break;
case 27:
MessageBox.Show("接收的字数不够！", "示例提示");
break;
case 28:
MessageBox.Show("接收的CRC错！", "示例提示");
break;
default:
MessageBox.Show("返回码(对应的说明请看例子中的注释):" + status, "示例提示");
break;
}
//返回解释
/*
REQUEST 8//寻卡错误
READSERIAL 9//读序列吗错误
SELECTCARD 10//选卡错误
LOADKEY 11//装载密码错误
AUTHKEY 12//密码认证错误
READ 13//读卡错误
WRITE 14//写卡错误
NONEDLL 21//没有动态库
DRIVERORDLL 22//动态库或驱动程序异常
DRIVERNULL 23//驱动程序错误或尚未安装
TIMEOUT 24//操作超时，一般是动态库没有反映
TXSIZE 25//发送字数不够
TXCRC 26//发送的CRC错
RXSIZE 27//接收的字数不够
RXCRC 28//接收的CRC错
*/
}
private void button8_Click(object sender, EventArgs e)//读取设备编号，可做为软件加密狗用,也可以根据此编号在公司网站上查询保修期限
{
byte[] devno = new byte[4];
if (pcdgetdevicenumber(devno) == 0)
{
pcdbeep(50);
MessageBox.Show("设备的序列号为："+System.Convert.ToString(devno[0]) + "-" + System.Convert.ToString(devno[1]) + "-" + System.Convert.ToString(devno[2]) + "-" + System.Convert.ToString(devno[3]),"示例程序");
//ShowMessage(IntToStr(devno[0]) + "-" + IntToStr(devno[1]) + "-" + IntToStr(devno[2]) + "-" + IntToStr(devno[3]));
}
}
private void button9_Click(object sender, EventArgs e)
{
string strls;
strls = textBox1.Text;
lcddispfull(strls);
}
private void button7_Click(object sender, EventArgs e)
{
if (button7.Text == "每十秒读一次")
{
pcdbeep(5);
byte[] devno = new byte[4];
if (pcdgetdevicenumber(devno) == 0)
{
textBox4.Text = System.Convert.ToString(devno[0]) + "-" + System.Convert.ToString(devno[1]) + "-" + System.Convert.ToString(devno[2]) + "-" + System.Convert.ToString(devno[3]);
}
else
{ textBox4.Text = ""; }
button12.Text = "轮询读IC卡号";
timer1.Enabled = false;
timer2.Enabled = true;
button7.Text = "暂停";
}
else
{
timer2.Enabled = false;
button7.Text = "每十秒读一次";
}
}
private void button11_Click(object sender, EventArgs e)
{
string cardstr;
byte status;//Store the return value
byte[] mypiccserial = new byte[4];//card serial
Int64 cardnumdec;
status = piccrequest(mypiccserial);
if (status == 0)
{
cardnumdec = mypiccserial[3];
cardnumdec = cardnumdec * 256;
cardnumdec = cardnumdec + mypiccserial[2];
cardnumdec = cardnumdec * 256;
cardnumdec = cardnumdec + mypiccserial[1];
cardnumdec = cardnumdec * 256;
cardnumdec = cardnumdec + mypiccserial[0];
cardstr = "0000000000" + Convert.ToString(cardnumdec);
textBox3.Text = cardstr.Substring(cardstr.Length-10) ;
pcdbeep(38);
}
}
private void button5_Click(object sender, EventArgs e)
{
string strls;
byte i;
byte status;//存放返回值
byte myareano;//区号
byte authmode;//密码类型，用A密码或B密码
byte myctrlword;//控制字
byte[] mypicckey = new byte[6];//密码
byte[] mypiccserial = new byte[4];//卡序列号
byte[] mypiccdata = new byte[48]; //卡数据缓冲
//控制字指定,控制字的含义请查看本公司网站提供的动态库说明
myctrlword = BLOCK0_EN + BLOCK1_EN + BLOCK2_EN + EXTERNKEY;
//指定区号
myareano = 8;//指定为第8区
//批定密码模式
authmode = 1;//大于0表示用A密码认证，推荐用A密码认证
//指定密码
mypicckey[0] = 0xff;
mypicckey[1] = 0xff;
mypicckey[2] = 0xff;
mypicckey[3] = 0xff;
mypicckey[4] = 0xff;
mypicckey[5] = 0xff;
strls = textBox1.Text + " ";
byte[] strlsansi = System.Text.Encoding.GetEncoding(936).GetBytes(strls);//转换为Ansi
for (i = 0; i < 48; i++)
{
mypiccdata[i] = strlsansi[i];
}
status = piccwriteex(myctrlword, mypiccserial, myareano, authmode, mypicckey, mypiccdata);
//在下面设定断点，然后查看mypiccserial、mypiccdata，
//调用完 piccreadex函数可读出卡序列号到 mypiccserial，读出卡数据到mypiccdata，
//开发人员根据自己的需要处理mypiccserial、mypiccdata 中的数据了。
//处理返回函数
switch (status)
{
case 0:
pcdbeep(50);
MessageBox.Show("操作成功,下栏文字信息已写入卡中！","示例提示");
break;
case 8:
MessageBox.Show("未寻到卡，请将卡放在感应区！", "示例提示");
break;
case 9:
MessageBox.Show("读序列码错误！", "示例提示");
break;
case 10:
MessageBox.Show("选卡错误！", "示例提示");
break;
case 11:
MessageBox.Show("装载密码错误！", "示例提示");
break;
case 12:
MessageBox.Show("卡密码认证错误！", "示例提示");
break;
case 13:
MessageBox.Show("读卡错误！", "示例提示");
break;
case 14:
MessageBox.Show("写卡错误！", "示例提示");
break;
case 21:
MessageBox.Show("没有动态库！", "示例提示");
break;
case 22:
MessageBox.Show("动态库或驱动程序异常！", "示例提示");
break;
case 23:
MessageBox.Show("驱动程序错误或尚未安装！", "示例提示");
break;
case 24:
MessageBox.Show("操作超时，一般是动态库没有反映！", "示例提示");
break;
case 25:
MessageBox.Show("发送字数不够！", "示例提示");
break;
case 26:
MessageBox.Show("发送的CRC错！", "示例提示");
break;
case 27:
MessageBox.Show("接收的字数不够！", "示例提示");
break;
case 28:
MessageBox.Show("接收的CRC错！", "示例提示");
break;
default:
MessageBox.Show("返回码(对应的说明请看例子中的注释):" + status, "示例提示");
break;
}
}
private void button6_Click(object sender, EventArgs e)
{
byte status;//存放返回值
byte myareano;//区号
byte authmode;//密码类型，用A密码或B密码
byte myctrlword;//控制字
byte[] mypicckey = new byte[6];//密码
byte[] mypiccserial = new byte[4];//卡序列号
byte[] mypiccdata = new byte[48]; //卡数据缓冲
//控制字指定,控制字的含义请查看本公司网站提供的动态库说明
myctrlword = BLOCK0_EN + BLOCK1_EN + BLOCK2_EN + EXTERNKEY;
//指定区号
myareano = 8;//指定为第8区
//批定密码模式
authmode = 1;//大于0表示用A密码认证，推荐用A密码认证
//指定密码
mypicckey[0] = 0xff;
mypicckey[1] = 0xff;
mypicckey[2] = 0xff;
mypicckey[3] = 0xff;
mypicckey[4] = 0xff;
mypicckey[5] = 0xff;
status = piccreadex(myctrlword, mypiccserial, myareano, authmode, mypicckey, mypiccdata);
//在下面设定断点，然后查看mypiccserial、mypiccdata，
//调用完 piccreadex函数可读出卡序列号到 mypiccserial，读出卡数据到mypiccdata，
//开发人员根据自己的需要处理mypiccserial、mypiccdata 中的数据了。
//处理返回函数
switch (status)
{
case 0:
string getdata = Encoding.Default.GetString(mypiccdata);
MessageBox.Show("读卡操作成功,卡内信息："+getdata, "示例程序");
break;
case 8:
MessageBox.Show("未寻到卡，请将卡放在感应区！", "示例提示");
break;
case 9:
MessageBox.Show("读序列码错误！", "示例提示");
break;
case 10:
MessageBox.Show("选卡错误！", "示例提示");
break;
case 11:
MessageBox.Show("装载密码错误！", "示例提示");
break;
case 12:
MessageBox.Show("卡密码认证错误！", "示例提示");
break;
case 13:
MessageBox.Show("读卡错误！", "示例提示");
break;
case 14:
MessageBox.Show("写卡错误！", "示例提示");
break;
case 21:
MessageBox.Show("没有动态库！", "示例提示");
break;
case 22:
MessageBox.Show("动态库或驱动程序异常！", "示例提示");
break;
case 23:
MessageBox.Show("驱动程序错误或尚未安装！", "示例提示");
break;
case 24:
MessageBox.Show("操作超时，一般是动态库没有反映！", "示例提示");
break;
case 25:
MessageBox.Show("发送字数不够！", "示例提示");
break;
case 26:
MessageBox.Show("发送的CRC错！", "示例提示");
break;
case 27:
MessageBox.Show("接收的字数不够！", "示例提示");
break;
case 28:
MessageBox.Show("接收的CRC错！", "示例提示");
break;
default:
MessageBox.Show("返回码(对应的说明请看例子中的注释):" + status, "示例提示");
break;
}
}
private void timer2_Tick(object sender, EventArgs e)
{
byte[] devno = new byte[4];
if (pcdgetdevicenumber(devno) == 0)
{
pcdbeep(20);
textBox4.Text = System.Convert.ToString(devno[0]) + "-" + System.Convert.ToString(devno[1]) + "-" + System.Convert.ToString(devno[2]) + "-" + System.Convert.ToString(devno[3]);
}
else
{ textBox4.Text = ""; }
}
private void button10_Click(object sender, EventArgs e)
{
}
private void button12_Click(object sender, EventArgs e)
{
if (button12.Text == "轮询读IC卡号")
{
button7.Text = "每十秒读一次";
timer2.Enabled = false;
timer1.Enabled = true;
button12.Text = "暂停";
}
else
{
timer1.Enabled = false;
button12.Text = "轮询读IC卡号";
}
}
private void timer1_Tick(object sender, EventArgs e)
{
byte status;//Store the return value
byte[] mypiccserial = new byte[4];//card serial
Int64 cardnumdec;
status = piccrequest(mypiccserial);
if (status == 0)
{
cardnumdec = mypiccserial[3];
cardnumdec = cardnumdec * 256;
cardnumdec = cardnumdec + mypiccserial[2];
cardnumdec = cardnumdec * 256;
cardnumdec = cardnumdec + mypiccserial[1];
cardnumdec = cardnumdec * 256;
cardnumdec = cardnumdec + mypiccserial[0];
string cardstr = "0000000000" + Convert.ToString(cardnumdec);
textBox3.Text = cardstr.Substring(cardstr.Length - 10);
pcdbeep(38);
}
}
private void Form1_Load(object sender, EventArgs e)
{
}
private void button10_Click_1(object sender, EventArgs e)
{
byte status;//存放返回值
byte myareano;//区号
byte authmode;//密码类型，用A密码或B密码
byte myctrlword;//控制字
byte[] piccoldkey = new byte[6];//旧密码
byte[] mypiccserial = new byte[4];//卡序列号
byte[] piccnewkey = new byte[17]; //新密码.
//控制字指定,控制字的含义请查看本公司网站提供的动态库说明
myctrlword = BLOCK0_EN + BLOCK1_EN + BLOCK2_EN + EXTERNKEY;
//指定区号
myareano = 8;//指定为第8区
//批定密码模式
authmode = 1;//大于0表示用A密码认证，推荐用A密码认证
//指定旧密码
piccoldkey[0] = 0xff;
piccoldkey[1] = 0xff;
piccoldkey[2] = 0xff;
piccoldkey[3] = 0xff;
piccoldkey[4] = 0xff;
piccoldkey[5] = 0xff;
//指定新密码,注意：指定新密码时一定要记住，否则有可能找不回密码，导致该卡报废。
piccnewkey[0] = 0xff; //A密码
piccnewkey[1] = 0xff;
piccnewkey[2] = 0xff;
piccnewkey[3] = 0xff;
piccnewkey[4] = 0xff;
piccnewkey[5] = 0xff;
piccnewkey[6] = 0xff; //控制字，除非您确定了解控制字的含意，否则不要更改，错改卡将报废
piccnewkey[7] = 0x07;
piccnewkey[8] = 0x80;
piccnewkey[9] = 0x69;
piccnewkey[10] = 0xff; //B密码
piccnewkey[11] = 0xff;
piccnewkey[12] = 0xff;
piccnewkey[13] = 0xff;
piccnewkey[14] = 0xff;
piccnewkey[15] = 0xff;
piccnewkey[16] = 0x03; //'3是表示同时更改A、B、 密码权限访问字，为2表示密码权限访问字不更改，只改A、B密码，为0表示只改A密码
status = piccchangesinglekeyex(myctrlword, mypiccserial, myareano, authmode, piccoldkey, piccnewkey);
//在下面设定断点，然后查看mypiccserial、mypiccdata，
//调用完 piccreadex函数可读出卡序列号到 mypiccserial，读出卡数据到mypiccdata，
//开发人员根据自己的需要处理mypiccserial、mypiccdata 中的数据了。
//处理返回函数
switch (status)
{
case 0:
pcdbeep(50);
MessageBox.Show("操作成功,密码已被修改!", "示例提示");
break;
case 8:
MessageBox.Show("未寻到卡，请将卡放在感应区！", "示例提示");
break;
case 9:
MessageBox.Show("读序列码错误！", "示例提示");
break;
case 10:
MessageBox.Show("选卡错误！", "示例提示");
break;
case 11:
MessageBox.Show("装载密码错误！", "示例提示");
break;
case 12:
MessageBox.Show("卡密码认证错误！", "示例提示");
break;
case 13:
MessageBox.Show("读卡错误！", "示例提示");
break;
case 14:
MessageBox.Show("写卡错误！", "示例提示");
break;
case 21:
MessageBox.Show("没有动态库！", "示例提示");
break;
case 22:
MessageBox.Show("动态库或驱动程序异常！", "示例提示");
break;
case 23:
MessageBox.Show("驱动程序错误或尚未安装！", "示例提示");
break;
case 24:
MessageBox.Show("操作超时，一般是动态库没有反映！", "示例提示");
break;
case 25:
MessageBox.Show("发送字数不够！", "示例提示");
break;
case 26:
MessageBox.Show("发送的CRC错！", "示例提示");
break;
case 27:
MessageBox.Show("接收的字数不够！", "示例提示");
break;
case 28:
MessageBox.Show("接收的CRC错！", "示例提示");
break;
default:
MessageBox.Show("返回码(对应的说明请看例子中的注释):" + status, "示例提示");
break;
}
}
private void button14_Click(object sender, EventArgs e)
{
byte status;//Store the return value
byte[] memo1 = new byte[4];//machinmemo1
string readinf;
status = pcdgetcustomizedata1(memo1);
if (status == 0)
{
readinf = "";
for (int i = 0; i < 4;i++ )
{
readinf = readinf + memo1[i].ToString("X2");
}
textBox2.Text = readinf;
pcdbeep(38);
}
}
private void button13_Click(object sender, EventArgs e)
{
byte[] memo1 = new byte[4];
string writinf;
writinf = textBox2.Text.Trim()+"00000000";
for (int i=0;i<4;i++)
{
memo1[i] = Convert.ToByte(Convert.ToInt32(writinf.Substring(i * 2, 2),16));
}
byte status = pcdsetcustomizedata1(memo1);
switch ( status)
{
case 0:
pcdbeep(50);
MessageBox.Show("操作成功,信息已写入设备!", "示例提示");
break;
case 21:
MessageBox.Show("没有动态库！", "示例提示");
break;
default:
MessageBox.Show("返回码(对应的说明请看例子中的注释):" + status, "示例提示");
break;
}
}
private void button15_Click(object sender, EventArgs e)
{
byte[] memo1 = new byte[8];
string writinf;
writinf = textBox5.Text.Trim() + "0000000000000000";
for (int i = 0; i < 8; i++)
{
memo1[i] = Convert.ToByte(Convert.ToInt32(writinf.Substring(i * 2, 2), 16));
}
byte status = pcdsetcustomizedata2(memo1);
switch (status)
{
case 0:
pcdbeep(50);
MessageBox.Show("操作成功,信息已写入设备!", "示例提示");
break;
case 21:
MessageBox.Show("没有动态库！", "示例提示");
break;
default:
MessageBox.Show("返回码(对应的说明请看例子中的注释):" + status, "示例提示");
break;
}
}
private void button16_Click(object sender, EventArgs e)
{
byte status;//Store the return value
byte[] memo1 = new byte[8];//machinmemo1
byte[] devno = new byte[4];
string readinf;
status = pcdgetcustomizedata2(memo1,devno);
if (status == 0)
{
readinf = "";
for (int i = 0; i < 8; i++)
{
readinf = readinf + memo1[i].ToString("X2");
}
textBox5.Text = readinf;
pcdbeep(38);
MessageBox.Show("设备的序列号为：" + System.Convert.ToString(devno[0]) + "-" + System.Convert.ToString(devno[1]) + "-" + System.Convert.ToString(devno[2]) + "-" + System.Convert.ToString(devno[3]), "示例程序");
}
}
private void button17_Click(object sender, EventArgs e)
{
byte status;//存放返回值
byte myareano;//区号
byte myblock; //块号
byte authmode;//密码类型，用A密码或B密码
byte[] mypicckey = new byte[6];//密码
byte[] mypiccserial = new byte[4];//卡序列号
byte[] mypiccdata = new byte[48]; //卡数据缓冲
byte[] myblockdata=new byte[16]; //块数据缓冲
//指定区号
myareano = 8;//指定为第8区
myblock =(byte)( myareano * 4 + 0); //块号为区号*4+0、1、2、3，其中第3块为密码控制块
//批定密码模式
authmode = 1;//大于0表示用A密码认证，推荐用A密码认证
//指定密码
mypicckey[0] = 0xff;
mypicckey[1] = 0xff;
mypicckey[2] = 0xff;
mypicckey[3] = 0xff;
mypicckey[4] = 0xff;
mypicckey[5] = 0xff;
status = piccrequest(mypiccserial);
if(status==0)
{
status = piccauthkey1(mypiccserial, myareano, authmode, mypicckey);
if (status == 0)
{
status = piccread(myblock, myblockdata);
if (status == 0)
{
string readinf = "";
for (int i = 0; i < 16; i++)
{
readinf = readinf + myblockdata[i].ToString("X2");
}
textBox6.Text = readinf;
MessageBox.Show("操作成功,数据已显示在右框栏中！", "示例程序");
return;
}
}
}
switch (status)
{
case 8:
MessageBox.Show("未寻到卡，请将卡放在感应区！", "示例提示");
break;
case 9:
MessageBox.Show("读序列码错误！", "示例提示");
break;
case 10:
MessageBox.Show("选卡错误！", "示例提示");
break;
case 11:
MessageBox.Show("装载密码错误！", "示例提示");
break;
case 12:
MessageBox.Show("卡密码认证错误！", "示例提示");
break;
case 13:
MessageBox.Show("读卡错误！", "示例提示");
break;
case 14:
MessageBox.Show("写卡错误！", "示例提示");
break;
case 21:
MessageBox.Show("没有动态库！", "示例提示");
break;
case 22:
MessageBox.Show("动态库或驱动程序异常！", "示例提示");
break;
case 23:
MessageBox.Show("驱动程序错误或尚未安装！", "示例提示");
break;
case 24:
MessageBox.Show("操作超时，一般是动态库没有反映！", "示例提示");
break;
case 25:
MessageBox.Show("发送字数不够！", "示例提示");
break;
case 26:
MessageBox.Show("发送的CRC错！", "示例提示");
break;
case 27:
MessageBox.Show("接收的字数不够！", "示例提示");
break;
case 28:
MessageBox.Show("接收的CRC错！", "示例提示");
break;
default:
MessageBox.Show("返回码(对应的说明请看例子中的注释):" + status, "示例提示");
break;
}
}
private void button18_Click(object sender, EventArgs e)
{
byte status;//存放返回值
byte myareano;//区号
byte myblock; //块号
byte authmode;//密码类型，用A密码或B密码
byte[] mypicckey = new byte[6];//密码
byte[] mypiccserial = new byte[4];//卡序列号
byte[] mypiccdata = new byte[48]; //卡数据缓冲
byte[] myblockdata = new byte[16]; //块数据缓冲
int i;
//指定区号
myareano = 8;//指定为第8区
myblock = (byte)(myareano * 4 + 0); //块号为区号*4+0、1、2、3，其中第3块为密码控制块
//批定密码模式
authmode = 1;//大于0表示用A密码认证，推荐用A密码认证
//指定密码
mypicckey[0] = 0xff;
mypicckey[1] = 0xff;
mypicckey[2] = 0xff;
mypicckey[3] = 0xff;
mypicckey[4] = 0xff;
mypicckey[5] = 0xff;
i = myblock % 4;
if (i== 3)
{
if (MessageBox.Show(" 你确定要修改密码及控制块数据吗？如写入错误的信息此扇区将报废。", "警告", MessageBoxButtons.YesNo, MessageBoxIcon.Question ) != DialogResult.Yes)
{
return;
}
}
//指定卡数据
string writinf = textBox6.Text.Trim() + "00000000000000000000000000000000";
for (i = 0; i < 16; i++)
{
myblockdata[i] = Convert.ToByte(Convert.ToInt32(writinf.Substring(i * 2, 2), 16));
}
status = piccrequest(mypiccserial);
if (status == 0)
{
status = piccauthkey1(mypiccserial, myareano, authmode, mypicckey);
if (status == 0)
{
status = piccwrite(myblock, myblockdata);
}
}
switch (status)
{
case 0:
pcdbeep(50);
MessageBox.Show("操作成功！", "示例程序");
break;
case 8:
MessageBox.Show("未寻到卡，请将卡放在感应区！", "示例提示");
break;
case 9:
MessageBox.Show("读序列码错误！", "示例提示");
break;
case 10:
MessageBox.Show("选卡错误！", "示例提示");
break;
case 11:
MessageBox.Show("装载密码错误！", "示例提示");
break;
case 12:
MessageBox.Show("卡密码认证错误！", "示例提示");
break;
case 13:
MessageBox.Show("读卡错误！", "示例提示");
break;
case 14:
MessageBox.Show("写卡错误！", "示例提示");
break;
case 21:
MessageBox.Show("没有动态库！", "示例提示");
break;
case 22:
MessageBox.Show("动态库或驱动程序异常！", "示例提示");
break;
case 23:
MessageBox.Show("驱动程序错误或尚未安装！", "示例提示");
break;
case 24:
MessageBox.Show("操作超时，一般是动态库没有反映！", "示例提示");
break;
case 25:
MessageBox.Show("发送字数不够！", "示例提示");
break;
case 26:
MessageBox.Show("发送的CRC错！", "示例提示");
break;
case 27:
MessageBox.Show("接收的字数不够！", "示例提示");
break;
case 28:
MessageBox.Show("接收的CRC错！", "示例提示");
break;
default:
MessageBox.Show("返回码(对应的说明请看例子中的注释):" + status, "示例提示");
break;
}
}
private void button19_Click(object sender, EventArgs e)
{
if (button19.Text == "开始侦听二代身份证UID")
{
timer3.Enabled = true;
button19.Text = "暂停";
}
else
{
timer3.Enabled = false;
button19.Text = "开始侦听二代身份证UID";
textBox8.Text = "";
}
}
private void timer3_Tick(object sender, EventArgs e)
{
byte[] uidno = new byte[8];
byte status=sfzrequest(uidno);
switch (status)
{
case 0:
pcdbeep(20);
Int64 cardnumdec = uidno[3] * 256 * 256 * 256 + uidno[2] * 256 * 256 + uidno[1] * 256 + uidno[0] ;
textBox8.Text = "读取16进制身份证UID：" + uidno[7].ToString("X2") + "-" + uidno[6].ToString("X2") + "-" + uidno[5].ToString("X2") + "-" + uidno[4].ToString("X2") + "-" + uidno[3].ToString("X2") + "-" + uidno[2].ToString("X2") + "-" + uidno[1].ToString("X2") + "-" + uidno[0].ToString("X2") + "，转8H10D卡号：" + cardnumdec.ToString("D10");
break;
case 8:
textBox8.Text = "请刷二代身份证...";
break ;
case 23:
textBox8.Text = "读写器未定连接或目录内的库文件错误！";
break ;
}
}
private void timer4_Tick(object sender, EventArgs e)
{
byte[] uidno = new byte[8];
byte status = iso15693iclassreadcsn(uidno);
switch (status)
{
case 0:
pcdbeep(20);
Int64 cardnumdec = uidno[3] * 256 * 256 * 256 + uidno[2] * 256 * 256 + uidno[1] * 256 + uidno[0];
textBox9.Text = "读取16进制卡号：" + uidno[0].ToString("X2") + "-" + uidno[1].ToString("X2") + "-" + uidno[2].ToString("X2") + "-" + uidno[3].ToString("X2") + "，转8H10D卡号：" + cardnumdec.ToString("D10");
break;
case 8:
textBox9.Text = "请刷HID ICLass ...";
break;
case 23:
textBox9.Text = "读写器未定连接或目录内的库文件错误！";
break;
}
}
private void button20_Click(object sender, EventArgs e)
{
if (button20.Text == "开始侦听HID ICLASS CSN")
{
timer4.Enabled = true;
button20.Text = "暂停";
}
else
{
timer4.Enabled = false;
button20.Text = "开始侦听HID ICLASS CSN";
textBox9.Text = "";
}
}
}
}