H3C堆叠（irf）教程

发布于：2022-12-05 ⋅ 阅读:(1364) ⋅ 点赞:(0)

一、堆叠使用堆叠线缆连接

二、堆叠的设备需要版本一致设备型号一致

1.命令步骤:

主

[1]Irf meber 1 priority 30

[1]inte range Ten-GigabitEthernet 1/0/49 to Ten-GigabitEthernet 1/0/50

[1-if-range]shut

[1]irf-port 1/1 端口加入组

[1-irf-port1/1]port group inte Ten-GigabitEthernet 1/0/49

[1-irf-port1/1]port group inte Ten-GigabitEthernet 1/0/50

[1]inter range Ten-GigabitEthernet 1/0/49 to Ten-GigabitEthernet 1/0/50

[1-if-range]no shut

[1]sa f

Validating file. Please wait...

Saved the current configuration to mainboard device successfully.

[1]irf-port-configuration active 这一步必须激活 irf配置

备：

[2]Irf member 2 priority 20

[2]irf member 1 renumber 2

[2]sa f

<2>reboot

[2]inte range Ten-GigabitEthernet 2/0/49 to Ten-GigabitEthernet 2/0/50

[2-if-range]shut

[2]irf-port 2/2

[2-irf-port1/1]port group inte Ten-GigabitEthernet 2/0/49

[2-irf-port1/1]port group inte Ten-GigabitEthernet 2/0/50

[2]inter range Ten-GigabitEthernet 2/0/49 to Ten-GigabitEthernet 2/0/50

[2-if-range]no shut

[2]sa f

Validating file. Please wait...

Saved the current configuration to mainboard device successfully.

[2]irf-port-configuration active