H3C ripng实验（ipv6）
实验需求
按照图示为路由器配置IPv6地址
所有路由器运行ripng，进行ipv6网段的互通
查询路由表后，进行全网段的ping测试，实验目的RTD可以ping通RTA
实验解法
按照图示为路由器配置IPv6地址
RTA
SYS
System View: return to User View with Ctrl+Z.
[H3C]SYSN rta
[rta]int g0/0
[rta-GigabitEthernet0/0]ipv6 add 1::2 64
RTB（使用链路本地地址作为ipv6地址）
sys
System View: return to User View with Ctrl+Z.
[H3C]sysn rtb
[rtb]int g0/0
[rtb-GigabitEthernet0/0]ipv6 add 1::1 64
[rtb-GigabitEthernet0/0]int g0/1
[rtb-GigabitEthernet0/1]ipv6 add fe80::1 link-local
RTC（使用链路本地地址作为ipv6地址）
sys
System View: return to User View with Ctrl+Z.
[H3C]sysn rtc
[rtc]int g0/0
[rtc-GigabitEthernet0/0]ipv6 add fe80::2 link-local
[rtc-GigabitEthernet0/0]int g0/1
[rtc-GigabitEthernet0/1]ipv6 add 2::1 64
RTD
sys
System View: return to User View with Ctrl+Z.
[H3C]sysn rtd
[rtd]int g0/0
[rtd-GigabitEthernet0/0]ipv6 add 2::2 64
所有路由器运行ripng，进行ipv6网段的互通
在RTA-----RTD上创建RIPng进程，并在接口使能RIPng
RTA
[rta-GigabitEthernet0/0]ripng
[rta-ripng-1]int g0/0
[rta-GigabitEthernet0/0]ripng 1 en
RTB
[rtb-GigabitEthernet0/1]ripng
[rtb-ripng-1]int ran g0/0 to g0/1
[rtb-if-range]ripng 1 en
RTC
[rtc-GigabitEthernet0/1]ripng
[rtc-ripng-1]int ran g0/0 to g0/1
[rtc-if-range]ripng 1 en
RTD
[rtd-GigabitEthernet0/0]ripng
[rtd-ripng-1]int g0/0
[rtd-GigabitEthernet0/0]ripng 1 en
查询路由表后，进行全网段的ping测试，实验目的RTD可以ping通RTA
RTD
[rtd-GigabitEthernet0/0]DIS IPV6 ROU PRO RIPNG