HCIA--VLAN实验（复习）

实验要求：

1.PC1/2/5 在vlan2，PC3/4/6在vlan3.

2.SW1、SW2之间，SW1、R1之间 为trunk干道，

3.PC不配地址，通过DHCP获取地址 

实验思路：

1.在SW上创建vlan，在对应接口划分vlan

2.SW1、SW2,SW1、R1之间创建trunk干道

3.R1上创建两个虚拟子接口，每个字接口划分vlan，并创建DHCP池塘

SW1 

[Huawei]sysname sw1
	
[sw1]vlan 2
[sw1-vlan2]
[sw1-vlan2]q	
[sw1]vlan 3
[sw1-vlan3]
[sw1]interface e0/0/2
[sw1-Ethernet0/0/2]port link-type access 
[sw1-Ethernet0/0/2]port default vlan 2
[sw1-Ethernet0/0/2]q

[sw1]interface e0/0/3	
[sw1-Ethernet0/0/3]port link-type access 
[sw1-Ethernet0/0/3]port default vlan 2
[sw1-Ethernet0/0/3]q
	
[sw1]port-group group-member  e0/0/4 to e0/0/5	
[sw1-port-group]port link-type access 
[sw1-Ethernet0/0/4]port link-type access 
[sw1-Ethernet0/0/5]port link-type access 
[sw1-Ethernet0/0/5]port default vlan 3
[sw1-port-group]

[sw1]interface e0/0/6
[sw1-Ethernet0/0/6]port link-type trunk 
[sw1-Ethernet0/0/6]port trunk allow-pass vlan 2 to 3
[sw1-Ethernet0/0/6]q

[sw1]interface e0/0/1	
[sw1-Ethernet0/0/1]port link-type trunk 
[sw1-Ethernet0/0/1]port trunk allow-pass vlan 2 to 3
[sw1-Ethernet0/0/1]

SW2

[Huawei]sysname sw2
[sw2]
[sw2]vlan batch 2 to 3

[sw2]interface e0/0/1	
[sw2-Ethernet0/0/1]port link-type trunk 	
[sw2-Ethernet0/0/1]port trunk allow-pass vlan 2 to 3
[sw2-Ethernet0/0/1]
	
[sw2]interface e0/0/2	
[sw2-Ethernet0/0/2]port link-type access 	
[sw2-Ethernet0/0/2]port default vlan 2
[sw2-Ethernet0/0/2]q
[sw2]inter	
[sw2]interface e0/0/3	
[sw2-Ethernet0/0/3]port link-type access 
[sw2-Ethernet0/0/3]port default vlan 3
[sw2-Ethernet0/0/3]

R1

[Huawei]sysname r1
[r1]	
[r1]interface g0/0/0.1
[r1-GigabitEthernet0/0/0.1]dot1q  termination vid 2
[r1-GigabitEthernet0/0/0.1]ip address 192.168.1.250 24
[r1-GigabitEthernet0/0/0.1]arp broadcast  enable 
[r1-GigabitEthernet0/0/0.1]q

[r1]interface g0/0/0.2
[r1-GigabitEthernet0/0/0.2]dot1q termination vid 3
[r1-GigabitEthernet0/0/0.2]ip address 192.168.2.250 24
[r1-GigabitEthernet0/0/0.2]arp broadcast enable 
[r1-GigabitEthernet0/0/0.2]q

[r1]dhcp enable 
[r1]ip pool a
[r1-ip-pool-a]network 192.168.1.0 mask 24
[r1-ip-pool-a]gateway-list 192.168.1.250 
[r1-ip-pool-a]q

[r1]ip pool b
[r1-ip-pool-b]network 192.168.2.0 mask 24
[r1-ip-pool-b]gateway-list 192.168.2.250
[r1-ip-pool-b]q
	
[r1]interface g0/0/0.1	
[r1-GigabitEthernet0/0/0.1]dhcp select global 
[r1-GigabitEthernet0/0/0.1]q
	
[r1]interface g0/0/0.2
[r1-GigabitEthernet0/0/0.2]dhcp select global 
[r1-GigabitEthernet0/0/0.2]

PC1

PC>IPCONFIG

Link local IPv6 address...........: fe80::5689:98ff:fe69:3ff8
IPv6 address......................: :: / 128
IPv6 gateway......................: ::
IPv4 address......................: 192.168.1.254
Subnet mask.......................: 255.255.255.0
Gateway...........................: 192.168.1.250
Physical address..................: 54-89-98-69-3F-F8
DNS server........................:

PC>

PC6

PC>IPCONFIG

Link local IPv6 address...........: fe80::5689:98ff:fe9e:1b7f
IPv6 address......................: :: / 128
IPv6 gateway......................: ::
IPv4 address......................: 192.168.2.254
Subnet mask.......................: 255.255.255.0
Gateway...........................: 192.168.2.250
Physical address..................: 54-89-98-9E-1B-7F
DNS server........................:

PC6 PING PC1
PC>PING 192.168.1.254

Ping 192.168.1.254: 32 data bytes, Press Ctrl_C to break
Request timeout!
From 192.168.1.254: bytes=32 seq=2 ttl=127 time=110 ms
From 192.168.1.254: bytes=32 seq=3 ttl=127 time=109 ms
From 192.168.1.254: bytes=32 seq=4 ttl=127 time=94 ms
From 192.168.1.254: bytes=32 seq=5 ttl=127 time=94 ms

--- 192.168.1.254 ping statistics ---
  5 packet(s) transmitted
  4 packet(s) received
  20.00% packet loss
  round-trip min/avg/max = 0/101/110 ms

PC>