Open CASCADE学习|BrepOffsetAPI_ThruSections无法放样成Solid

发布于：2024-04-18 ⋅ 阅读:(31) ⋅ 点赞:(0)

目录

1、边界线（TopoDS_Wire）不在一个平面上时，无法生成Solid

2、边界线（TopoDS_Wire）在一个平面上时，可以生成Solid

3、边界线（TopoDS_Wire）不在一个平面上时，添加TopoDS_Vertex后生成Solid

在Open CASCADE Technology (OCCT) 中，BRepOffsetAPI_ThruSections 类是用来通过放样生成一个实体或者一个面壳（Shell）。当使用这个类时，isSolid 参数决定了生成的是实体（TopoDS_Solid）还是面壳（TopoDS_Shell）。如果isSolid为true，则尝试生成实体；如果为false，则生成面壳。

然而，当两个边界线（TopoDS_Wire）不在一个平面上时，使用BRepOffsetAPI_ThruSections 可能会遇到问题，因为放样过程通常需要在一个连续的平面或者空间曲线上进行。

1、边界线（TopoDS_Wire）不在一个平面上时，无法生成Solid

#include <gp_Ax2.hxx>
#include <gp_Circ.hxx>
#include <BRepBuilderAPI_MakeEdge.hxx>
#include <TopoDS_Wire.hxx>
#include <BRepBuilderAPI_MakeWire.hxx>
#include <BRepOffsetAPI_ThruSections.hxx>
​
#include"Viewer.h"
​
int main(int argc, char* argv[])
{
    gp_Dir  Z(0.0, 0.0, 1.0);
    gp_Pnt center(0, 0, 0.0);
    gp_Pnt xr(0.5, 0, 0.0);
    gp_Pnt yr(0.0, 1.0, 0.0);
    gp_Pnt zr(0.0, 0.0, 7.0);
    gp_Ax2  wb(center, Z);
    gp_Circ  wbcircle(wb, 0.125 / 2);
    TopoDS_Edge wbe = BRepBuilderAPI_MakeEdge(wbcircle);
    TopoDS_Edge xline = BRepBuilderAPI_MakeEdge(center, xr);
    TopoDS_Edge yline = BRepBuilderAPI_MakeEdge(center, yr);
    TopoDS_Edge zline = BRepBuilderAPI_MakeEdge(center, zr);
​
    // test
    TopoDS_Edge L1 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.0, 0.0, 0.0), gp_Pnt(1.0, 0.0, 0.5));
    TopoDS_Edge L2 = BRepBuilderAPI_MakeEdge(gp_Pnt(1.0, 0.0, 0.5), gp_Pnt(1.0, 1.0, 0.0));
    TopoDS_Edge L3 = BRepBuilderAPI_MakeEdge(gp_Pnt(1.0, 1.0, 0.0), gp_Pnt(0.0, 1.0, 0.5));
    TopoDS_Edge L4 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.0, 1.0, 0.5), gp_Pnt(0.0, 0.0, 0.0));
    BRepBuilderAPI_MakeWire mkWire_L;
    mkWire_L.Add(L1);
    mkWire_L.Add(L2);
    mkWire_L.Add(L3);
    mkWire_L.Add(L4);
    TopoDS_Wire Wire_L = mkWire_L.Wire();
​
    TopoDS_Edge L11 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.0, 0.0, 1.0), gp_Pnt(1.0, 0.0, 1.0));
    TopoDS_Edge L12 = BRepBuilderAPI_MakeEdge(gp_Pnt(1.0, 0.0, 1.0), gp_Pnt(1.0, 1.0, 1.0));
    TopoDS_Edge L13 = BRepBuilderAPI_MakeEdge(gp_Pnt(1.0, 1.0, 1.0), gp_Pnt(0.0, 1.0, 1.0));
    TopoDS_Edge L14 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.0, 1.0, 1.0), gp_Pnt(0.0, 0.0, 1.0));
    BRepBuilderAPI_MakeWire mkWire_U;
    mkWire_U.Add(L11);
    mkWire_U.Add(L12);
    mkWire_U.Add(L13);
    mkWire_U.Add(L14);
    TopoDS_Wire Wire_U = mkWire_U.Wire();
​
    BRepOffsetAPI_ThruSections mk_solid(Standard_True);
    mk_solid.AddWire(Wire_L);
    mk_solid.AddWire(Wire_U);
    TopoDS_Shape Solid_Test = mk_solid.Shape();
​
​
    Viewer vout(50, 50, 500, 500);
    vout << wbe;
    vout << xline;
    vout << yline;
    vout << zline;
    vout << Solid_Test;
    vout.StartMessageLoop();
    return 0;
}
​

2、边界线（TopoDS_Wire）在一个平面上时，可以生成Solid

#include <gp_Ax2.hxx>
#include <gp_Circ.hxx>
#include <BRepBuilderAPI_MakeEdge.hxx>
#include <TopoDS_Wire.hxx>
#include <BRepBuilderAPI_MakeWire.hxx>
#include <BRepOffsetAPI_ThruSections.hxx>
​
#include"Viewer.h"
​
int main(int argc, char* argv[])
{
    gp_Dir  Z(0.0, 0.0, 1.0);
    gp_Pnt center(0, 0, 0.0);
    gp_Pnt xr(0.5, 0, 0.0);
    gp_Pnt yr(0.0, 1.0, 0.0);
    gp_Pnt zr(0.0, 0.0, 7.0);
    gp_Ax2  wb(center, Z);
    gp_Circ  wbcircle(wb, 0.125 / 2);
    TopoDS_Edge wbe = BRepBuilderAPI_MakeEdge(wbcircle);
    TopoDS_Edge xline = BRepBuilderAPI_MakeEdge(center, xr);
    TopoDS_Edge yline = BRepBuilderAPI_MakeEdge(center, yr);
    TopoDS_Edge zline = BRepBuilderAPI_MakeEdge(center, zr);
​
    // test
    TopoDS_Edge L1 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.0, 0.0, 0.0), gp_Pnt(1.0, 0.0, 0.0));
    TopoDS_Edge L2 = BRepBuilderAPI_MakeEdge(gp_Pnt(1.0, 0.0, 0.0), gp_Pnt(1.0, 1.0, 0.0));
    TopoDS_Edge L3 = BRepBuilderAPI_MakeEdge(gp_Pnt(1.0, 1.0, 0.0), gp_Pnt(0.0, 1.0, 0.0));
    TopoDS_Edge L4 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.0, 1.0, 0.0), gp_Pnt(0.0, 0.0, 0.0));
    BRepBuilderAPI_MakeWire mkWire_L;
    mkWire_L.Add(L1);
    mkWire_L.Add(L2);
    mkWire_L.Add(L3);
    mkWire_L.Add(L4);
    TopoDS_Wire Wire_L = mkWire_L.Wire();
​
    TopoDS_Edge L11 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.0, 0.0, 1.0), gp_Pnt(1.0, 0.0, 1.0));
    TopoDS_Edge L12 = BRepBuilderAPI_MakeEdge(gp_Pnt(1.0, 0.0, 1.0), gp_Pnt(1.0, 1.0, 1.0));
    TopoDS_Edge L13 = BRepBuilderAPI_MakeEdge(gp_Pnt(1.0, 1.0, 1.0), gp_Pnt(0.0, 1.0, 1.0));
    TopoDS_Edge L14 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.0, 1.0, 1.0), gp_Pnt(0.0, 0.0, 1.0));
    BRepBuilderAPI_MakeWire mkWire_U;
    mkWire_U.Add(L11);
    mkWire_U.Add(L12);
    mkWire_U.Add(L13);
    mkWire_U.Add(L14);
    TopoDS_Wire Wire_U = mkWire_U.Wire();
​
    BRepOffsetAPI_ThruSections mk_solid(Standard_True);
    mk_solid.AddWire(Wire_L);
    mk_solid.AddWire(Wire_U);
    TopoDS_Shape Solid_Test = mk_solid.Shape();
​
    Viewer vout(50, 50, 500, 500);
    vout << wbe;
    vout << xline;
    vout << yline;
    vout << zline;
    vout << Solid_Test;
    vout.StartMessageLoop();
    return 0;
}
​

3、边界线（TopoDS_Wire）不在一个平面上时，添加TopoDS_Vertex后生成Solid
 

#include <gp_Ax2.hxx>
#include <gp_Circ.hxx>
#include <BRepBuilderAPI_MakeEdge.hxx>
#include <TopoDS_Wire.hxx>
#include <BRepBuilderAPI_MakeWire.hxx>
#include <BRepOffsetAPI_ThruSections.hxx>
#include <BRepBuilderAPI_MakeVertex.hxx>

#include"Viewer.h"

int main(int argc, char* argv[])
{
    gp_Dir  Z(0.0, 0.0, 1.0);
    gp_Pnt center(0, 0, 0.0);
    gp_Pnt xr(0.5, 0, 0.0);
    gp_Pnt yr(0.0, 1.0, 0.0);
    gp_Pnt zr(0.0, 0.0, 7.0);
    gp_Ax2  wb(center, Z);
    gp_Circ  wbcircle(wb, 0.125 / 2);
    TopoDS_Edge wbe = BRepBuilderAPI_MakeEdge(wbcircle);
    TopoDS_Edge xline = BRepBuilderAPI_MakeEdge(center, xr);
    TopoDS_Edge yline = BRepBuilderAPI_MakeEdge(center, yr);
    TopoDS_Edge zline = BRepBuilderAPI_MakeEdge(center, zr);

    // test
    TopoDS_Edge L1 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.0, 0.0, 0.0), gp_Pnt(1.0, 0.0, 0.5));
    TopoDS_Edge L2 = BRepBuilderAPI_MakeEdge(gp_Pnt(1.0, 0.0, 0.5), gp_Pnt(1.0, 1.0, 0.0));
    TopoDS_Edge L3 = BRepBuilderAPI_MakeEdge(gp_Pnt(1.0, 1.0, 0.0), gp_Pnt(0.0, 1.0, 0.5));
    TopoDS_Edge L4 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.0, 1.0, 0.5), gp_Pnt(0.0, 0.0, 0.0));
    TopoDS_Vertex vL = BRepBuilderAPI_MakeVertex(gp_Pnt(0.5, 0.5, 0.2));
    BRepBuilderAPI_MakeWire mkWire_L;
    mkWire_L.Add(L1);
    mkWire_L.Add(L2);
    mkWire_L.Add(L3);
    mkWire_L.Add(L4);
    TopoDS_Wire Wire_L = mkWire_L.Wire();

    TopoDS_Edge L11 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.0, 0.0, 1.0), gp_Pnt(1.0, 0.0, 1.0));
    TopoDS_Edge L12 = BRepBuilderAPI_MakeEdge(gp_Pnt(1.0, 0.0, 1.0), gp_Pnt(1.0, 1.0, 1.0));
    TopoDS_Edge L13 = BRepBuilderAPI_MakeEdge(gp_Pnt(1.0, 1.0, 1.0), gp_Pnt(0.0, 1.0, 1.0));
    TopoDS_Edge L14 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.0, 1.0, 1.0), gp_Pnt(0.0, 0.0, 1.0));
    TopoDS_Vertex vU = BRepBuilderAPI_MakeVertex(gp_Pnt(0.5, 0.5, 1.));
    BRepBuilderAPI_MakeWire mkWire_U;
    mkWire_U.Add(L11);
    mkWire_U.Add(L12);
    mkWire_U.Add(L13);
    mkWire_U.Add(L14);
    TopoDS_Wire Wire_U = mkWire_U.Wire();

    BRepOffsetAPI_ThruSections mk_solid(Standard_True);
    mk_solid.AddVertex(vL);
    mk_solid.AddWire(Wire_L);
    mk_solid.AddWire(Wire_U);
    mk_solid.AddVertex(vU);
    TopoDS_Shape Solid_Test = mk_solid.Shape();

    Viewer vout(50, 50, 500, 500);
    vout << wbe;
    vout << xline;
    vout << yline;
    vout << zline;
    vout << Solid_Test;
    vout.StartMessageLoop();
    return 0;
}

网站公告

今日签到

点亮在社区的每一天
去签到

热门文章

最新发布